Published October 19, 2020

How To Create Custom animation in OLED display

Hi guys this is me Rohan Barnwal welcome back with another project in this project we are going know about that how you can make animation

IntermediateFull instructions provided5,685

How To Create Custom animation in OLED display

Things used in this project

Hardware components

Arduino UNO

ElectroPeak 0.96" OLED 64x128 Display Module

Male/Female Jumper Wires

Software apps and online services

Arduino IDE

Story

Hi guys this is me Rohan Barnwal welcome back with another project in this project we talk about how you can create animations in OLED display I hope you'll love this project I can't upload the pictures due to some problem occured on System So you can check this video it contains subtitle also from were you can check

Connection

SDA to SDA

SCL to SCL

VCC to +5v

GND to GND

How to create animation in oled display

Code

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <Fonts/FreeSans9pt7b.h>
#include <Fonts/FreeSans18pt7b.h>
#include <Fonts/FreeSans12pt7b.h>


#define OLED_RESET 0  // GPIO0
Adafruit_SSD1306 display(OLED_RESET);



void setup() {
  // put your setup code here, to run once:isplay.begin(SSD1306_SWITCHCAPVCC, 0x3C);  // initialize with the I2C addr 0x3C (for the 64x48)
   display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
   display.display();
   display.clearDisplay();
   display.setFont(&FreeSans9pt7b);
  
  display.setTextColor(WHITE);
  display.setCursor(0,0);
}

int xx=40;
int yy=0;
int tt=0;

void loop() {
 
}