Tim Michals

12 Projects10 Followers4 Following
Contact
Bio

Development for embedded projects from FPGAs to embedded Linux

Joined

March 2019

Skills

Firmware, FPGA, Python, C++

Location

Dallas, Texas, United States

Projects
Instead of using petalinux lets use buildroot
Zynq FPGA board using buildroot
3
What is the difference between between Pico 2W, Pimoroni Pico Plus 2 w and Elecrow RP3250 Pico W5 Board. Goal is to show the differences.
Comparison of several Pico W's
119
Using Tang9K to control Blinkt!
TangNano 9K controlling multiple LED targets Part 3 of 3
99
How to use wishbone bus to control multiple LED targets/Hardware via simple serial protocol
TangNano 9K controlling multiple LED targets Part 2 of 3
87
How to use wishbone bus to control multiple LED targets via serial
TangNano 9K controlling multiple LED targets Part 1 of 3
102
How to control LEDs using using a serial protocol
Using serial to control the LEDs on a Tang nano 9K FPGA
359
Checking out a low cost FPGA and OSS tools
Sipeed Tang Nano 9K with OSS CAD Suite
315
The goal is to offload basic I/O processing to a FPGA and read/write the results via SPI from Raspberry PI Zero
How communicate to a FPGA using a Raspberry PI zero via SPI
1.5K
Products12+ Add products
VS Code
2 projects
Camera Module
0 projects
Channels11+ Add channels
AMD
Top 25% Contributor