Overview
Things
Story
Credits
Comments(0)

Bare Naked Embedded

Bare Naked Embedded

Published April 2, 2024 © MIT

DIY e-Kayak: Part Two (Oar Controller)

This is my hands free, on-oar, remote control for the DIY electric kayak.

IntermediateWork in progressOver 1 day75

DIY e-Kayak: Part Two (Oar Controller)

Things used in this project

Hardware components

NeoPixel Ring: WS2812 5050 RGB LED

Adafruit NeoPixel Ring: WS2812 5050 RGB LED

×

1

Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

×

1

Gravity BNO055+BMP280 intelligent 10DOF AHRS

DFRobot Gravity BNO055+BMP280 intelligent 10DOF AHRS

×

1

nRF24 Module (Generic)

×

1

Story

Check out my part two YouTube video for a full overview of the hardware / firmware!

This oar controller records the oar position, sets the kayak speed and has a sweet LED ring display!

Credits

Bare Naked Embedded

Bare Naked Embedded

4 projects • 1 follower

Passionate embedded systems engineer bringing electronics projects to life!

Comments