1-Wire Automatic Discovery Feature - Pushed to the Limit

I was curious to see how many 1-wire DS18B20 sensors Cayenne could automatically discover. To my delightful surprise, 9 DS18B20 sensors were automatically discovered, without me having to add a single widget. Total time: ~ 20 mins. With the majority of time spent wiring each DS18B20. Unfortunately I ran out of additional DS18B20 to connect....  I'll have to update this post when I exceed 9. Thanks for checking this project out!

Overview

• I used the web dashboard for adding the DS18B20, but the widgets also appeared in the app.
• I used two types of DS18B20, 5 normal sensors and 4 waterproof coils. I used a 4.7K resistor for each DS18B20.
• Each DS18B20 is connected to GPIO Pin 4. I used a small breadboard to connect each sensor to GPIO Pin 4.
• I installed Cayenne, powered my Pi off, connected the 5 normal sensors, powered my Pi back on, and verified that all 5 DS18B20 automatically appeared on the dashboard. (Had to wait a few seconds).
• I then powered my Pi off again, connected the remaining 4 DS18B20 waterproof coils, powered my Pi back on, and the remaining 4 DS18B20 waterproof temperature coils appeared in my dashboard.
• Interesting to see the variation of temperature between each sensor.
• Wiring tutorial for the DS18B20 sensor can be found here. 

Pictures