Hardware components | ||||||
 |
| × | 1 | |||
ALED a LED with Artificial Intelligence that predict the Electricity bill in advance for using it in predefined hours and its artificial intelligence system provides real time Power calculations and informs the support center in case of any failure in the LED system
WorkingThe Power consumed by a DC LED light is constant one and it is know by the manufacturer. The C-Sleep Android App makes the user to select the ON time and OFF time.
By knowing the ON time and OFF time the LED the electricity bill can be predicted.
Let me show you an Example
Suppose I want to use LED light From 6.00 PM to 11.30 PM in full brightness. Then after 11.30 PM I usually went to bed...so from 11.30 PM onwards it has to glow in 50% brightness..... then at morning 6.00 AM It wakes me up with full brightness and its in ON condition then till i Leave the home by 8.00 AM.
Full brightness Time
11.30 PM-6.00 PM = 5.30 hours
8.00AM-6.00AM = 2 hours
(+) = 7.30 hours (total)
Half brightness Time
6.00AM-11.30PM=6.30 hours
Amount Prediction
Assumption:
Power of the LED at Full Brightness be 40 watts per hour
Power of LED at 50% Brightness be 20 watts per hour
so
Total Energy Consumed is 40*7.30 + 20*6.30 = 418 W hr
Rate for per KW consumption has to be obtained from user as it differs from country to country
Assume rate per unit be $5
So Electricity Bill amount for per day usage of LED = (418/1000)*5
= $2.09
similarly for 30 days It can be calculated
Electricity bill Amount for using the LED per month = 2.09*30 =$62.7
Thus by doing this for all the LED's In Home, Automatic control of Light at predefined Time + Electricity bill amount Prediction can be done in advance .
Example Android APP screenshot
Dynamic Power Calculation
The above case suits perfectly in case of Automatic control but in case of manual control dynamic power calculations has to be performed.
Sometimes I need to wake up early or during rainy seasons as sunsets earlier, at that time App provides a Manual control for LED
due to manual Turn On and Turn OFF the Predicted Electric bill amount may change, for this real time power calculation is done
Manual Turn ON and Turn OFF time should be noted, by subtracting two times the LED lit hours is calculated and doing the same calculation above the amount is calculated.
Amount for Power consumed by LED during Manual control = (((Turn Off time - Turn On time) * watts for current Brightness)/1000 )* $5
this amount has to be added with Old Estimated Monthly amount.
This is same for the case of Early Off then Predefined Time
This Led is Programmed with AI that its capable of detecting failures like LED Burnt or any other failures and informs this to the user and automatically log a request to the manufacturer for service or Orders a new one....!!!
For this LED has to be connected with Home WiFi network so that in case of any failure detection its sends a mail to the manufacturer regarding fault... if its a severe fault then it Automatically orders a new one like amazon button
Additional Features
How it will be if your LED wishes u for your B'Day, New Year, Christmas yes Its possible
LED fixtures with in built speakers, The manufacturer uploads the new musics for new year and Christmas. The LED downloads it using WiFi and plays at predefined time i.e at 00:00 LED wishes you Happy New Year
by this way firmware up-gradation is also possible thus fixing bugs and adding additional features to LED remotely.....!!!
Comments