Hackster is hosting Hackster Holidays, Ep. 7: Livestream & Giveaway Drawing. Watch previous episodes or stream live on Friday!Stream Hackster Holidays, Ep. 7 on Friday!
circuito.io team
Published © GPL3+

Dancing Robot

For this little guy, you'll need to purchase a simple push-up toy. Make sure to adjust the 3D-printed parts.

BeginnerShowcase (no instructions)3 hours1,982

Things used in this project

Hardware components

SparkFun Resistor Kit - 1/4W (500 total)
×1
SparkFun Capacitor Kit
×1
Arduino UNO
Arduino UNO
×1
SparkFun Servo - Generic Metal Gear (Micro Size)
×1
SparkFun Wall Adapter Power Supply - 12VDC 600mA
×1
SparkFun USB Cable A to B - 6 Foot
×1
SparkFun Jumper Wires Standard 7" M/M - 30 AWG (30 Pack)
×1
SparkFun Heatsink TO-220
×1
SparkFun Breadboard - Full-Size (Bare)
×1
SparkFun Jumper Wires - Connected 6" (M/F, 20 pack)
×1
SparkFun Flex Sensor 4.5"
×1
SparkFun Voltage Regulator - 5V
×1
SparkFun Capacitor Ceramic 0.1uF
×1

Software apps and online services

https://circuito.io/

Hand tools and fabrication machines

3D Printer (generic)
3D Printer (generic)

Custom parts and enclosures

Dancing Robot assembly

Before printing these parts, make sure that they are suitable for the size of the push-up toy you chose to use.

fin8okwimnqophi_LOr5ZGHPh3.sldprt

f7f7b83imnqophk_xCUog1GZ0W.sldprt

f3cw789imnqophp_pUEnQ3nuoQ.sldprt

Schematics

Dancing Robot schematics

Credits

circuito.io team
29 projects • 601 followers
Circuito.io is an online platform that generates wiring and code for Arduino projects. Want to know more? Visit http://circuito.io

Comments

Related channels and tags
  • SparkFun