Arduino UNO mechanic switches shield

Building the Shield:

Materials:

6x 10 Ohm Resistors.

6x Mechanical keyboard switches.

1x Arduino UNO

20x Generic pins.

Steps:

1- Solder the resistors to the resistor sockets located on the sides of the shield

2- Solder the Switches to the sockets

3- Program the board.

If you want to download the Gerber or order the board, check the project on Pcbway:

https://www.pcbway.com/project/shareproject/Arduino_UNO_mechanic_switches_shield_f53f3faa.html