This is a through-hole version of my other PCB to link a pair of Raspberry Pi Camera connectors together, each PCB will require 2 connectors, they are through-hole connectors that need to be soldered on to the PCB, they can only go on one way, with the connectors facing the nearest short edge of the board.
N.B. The ribbon cable is installed with the contacts on the cable facing towards the PCB.
I used a pair of Amphenol SLW15R-1C7LF ribbon cable adapters. I have not included the appropriate Eagle libraries, but they are easy enough to find.
I was able to get 10 of the PCBs manufactured by JLCPCB for £1.53, with about £4 shipping to the UK.
Attached are the board files if you want to use Eagle to modify them, and the.zip of files required for manufacture, you should be able to import the.zip file straight into the JLCPCB website and it should all make sense.
Version History
In the most recent version of the board, 0.2 I have included the open source hardware logo on the back of the silkscreen.
Comments
Please log in or sign up to comment.