mdraber
Published © GPL3+

TM1637 Digital Clock with time setup and alarm functionality

This project is a prototype I will use in other digital clock projects I have in the works.

IntermediateFull instructions provided20,993
TM1637 Digital Clock with time setup and alarm functionality

Things used in this project

Hardware components

Arduino Nano R3
Arduino Nano R3
×1
TM1637 4 digit display
×1
DS1302 RTC module
×1
LilyPad LED Blue (5pcs)
SparkFun LilyPad LED Blue (5pcs)
×1
Buzzer
Buzzer
×1

Story

Read more

Schematics

Schematics

Code

Displaying time from RTC module plus time setup and Alarm setup functionality

Arduino
This code is reading current time from the RTC module. Then it also allows to update current time and also setup Alarm time.
Setup actions are performed using 3 buttons.
// Mario's Ideas
// TM1637 Digital Clock with Setup and Alarm Functionality

#include <Arduino.h>
#include <TM1637Display.h>
#include <virtuabotixRTC.h> //

// RTC module declaration
// PINS CLK, DAT, RST
virtuabotixRTC myRTC(A1,A2,A3);

// Variables to store previous values read off RTC module
int minutes;
int hours;
// Variables to store the time at which Alarm should go off 
int Alarm_minutes=05;
int Alarm_hours=18;
uint8_t Blank[] = {0x0};

int POSITION=0;

//Table to store 4 digits, used in time and Alarm setup procedure
int digits[3];

int interval=0;

#define Alarm 9 // Button to switch alarm mode on or off
#define Buzer 13
#define Led 8


//Statuses
boolean Alarm_set=false;
boolean Alarm_in_progress=false;
boolean Setup_on= false;

// 4digit display connection pins (Digital Pins)
#define CLK 4
#define DIO 5


// 4 digit display declaration
TM1637Display clock(CLK, DIO);

void setup() {
  
 attachInterrupt(digitalPinToInterrupt(2), Press_A_Button,RISING);
 attachInterrupt(digitalPinToInterrupt(3), Press_B_Button,RISING);
 pinMode(Alarm, INPUT);
 pinMode(Buzer, OUTPUT);
 pinMode(Led, OUTPUT);
 digitalWrite(Buzer,LOW);
 clock.setBrightness(0x0f);
 Serial.begin(9600);
}

void Press_A_Button(){
  if (interval>3){
    if (Setup_on==false){
      Setup_on=true;
      if (Alarm_set==true){
        digits[0]= (int)Alarm_hours/10;
        digits[1]= Alarm_hours-((int)Alarm_hours/10)*10;
        digits[2]= (int)Alarm_minutes/10;
        digits[3]= Alarm_minutes-((int)Alarm_minutes/10)*10; 
      } 
      else {
        digits[0]= (int)myRTC.hours/10;
        digits[1]= myRTC.hours-((int)myRTC.hours/10)*10;
        digits[2]= (int)myRTC.minutes/10;
        digits[3]= myRTC.minutes-((int)myRTC.minutes/10)*10;
      }
    }
    else{
      POSITION++;
      if (POSITION==4){
        if (Alarm_set==true){
          Alarm_minutes=digits[3]+digits[2]*10;
          Alarm_hours=digits[1]+digits[0]*10;
        } 
        else {
          myRTC.setDS1302Time( 0, digits[3]+digits[2]*10, digits[1]+digits[0]*10,myRTC.dayofweek, myRTC.dayofmonth, myRTC.month, myRTC.year);
          clock.showNumberDec(digits[0],false,1,0);
          clock.showNumberDec(digits[1],false,1,1);
          clock.showNumberDec(digits[2],false,1,2);
         clock.showNumberDec(digits[3],false,1,3);
        }
        POSITION=0;
        Setup_on=false;
      }
    }
  }
  interval=0;
}

void Press_B_Button(){
  if (interval>3){
    if(Setup_on){
      digits[POSITION]=digits[POSITION]+1;
      if (POSITION==0 and digits[POSITION]==3) digits[POSITION]=0;
      if (POSITION!=0 and digits[POSITION]==10) digits[POSITION]=0;
      interval=0;
    } 
  }
  interval=0;
}

void loop() {  
  if (digitalRead(Alarm)==HIGH and Alarm_set==false ){
    if (interval>30){
      digitalWrite(Led,HIGH);
      Alarm_set=true;
      delay(300);
    }
  } else{
    if (digitalRead(Alarm)==HIGH and Alarm_set==true){
      if (interval>30){
      Alarm_set=false;
      Alarm_in_progress=false;
      digitalWrite(Led,LOW);
      delay(300);
    }
   }
 }
 myRTC.updateTime();
 
 
 if (Setup_on==true){
    clock.showNumberDec(digits[0],false,1,0);
    clock.showNumberDec(digits[1],false,1,1);
    clock.showNumberDec(digits[2],false,1,2);
    clock.showNumberDec(digits[3],false,1,3);
    delay(200);
    clock.setSegments(Blank, 1,POSITION);  
    delay(200);
    clock.showNumberDec(digits[0],false,1,0);
    clock.showNumberDec(digits[1],false,1,1);
    clock.showNumberDec(digits[2],false,1,2);
    clock.showNumberDec(digits[3],false,1,3);
  }
 else{
   if (myRTC.minutes==Alarm_minutes and myRTC.hours==Alarm_hours and Alarm_set==true and Setup_on==false){
    Alarm_in_progress=true;
   }

   if (Alarm_in_progress){
     digitalWrite(Buzer,HIGH);
     delay(1000);
     digitalWrite(Buzer,LOW);
     delay(1000);
   } 
   
 if (myRTC.minutes!=minutes){
    
   clock.showNumberDecEx((int)myRTC.hours/10*1000+(myRTC.hours-((int)myRTC.hours/10)*10)*100+ (int)myRTC.minutes/10*10+myRTC.minutes-((int)myRTC.minutes/10)*10, (0x80 >> 1), true);

   minutes=myRTC.minutes;
   hours=myRTC.hours;
   
   }
 }
 if (interval<200) interval++;
}

Credits

mdraber

mdraber

49 projects • 67 followers

Comments