mommel
Published © CC BY-NC-SA

Schwurbler - A DIY Lightroom Midi Controller

The community of the HappyShooting Podcast shares an opensource hardware midi controller for Adobe Lightroom. From and for photographers

IntermediateWork in progress2,672
Schwurbler - A DIY Lightroom Midi Controller

Things used in this project

Hardware components

Teensy 4.0 Development Board
Teensy 4.0 Development Board
×1
Tactile Switch, Top Actuated
Tactile Switch, Top Actuated
×14
Rotary Potentiometer, 10 kohm
Rotary Potentiometer, 10 kohm
×9
LED (generic)
LED (generic)
×1
Resistor 330 ohm
Resistor 330 ohm
×1
Custom PCB
Custom PCB
Optional: Gerber Files to order or Etching to create on your own included
×1

Software apps and online services

PlatformIO IDE
PlatformIO IDE
MIDI2LR
The awesome software project and the connection between MIDI from the controller and Lightroom
Adobe Lightroom Classic
As it is intended to control the Lightroom

Hand tools and fabrication machines

Soldering iron (generic)
Soldering iron (generic)
Solder Wire, Lead Free
Solder Wire, Lead Free
10 Pc. Jumper Wire Kit, 5 cm Long
10 Pc. Jumper Wire Kit, 5 cm Long
Optional: Only recommended if no custom pcb is used
Wire Stripper & Cutter, 18-10 AWG / 0.75-4mm² Capacity Wires
Wire Stripper & Cutter, 18-10 AWG / 0.75-4mm² Capacity Wires
Optional:Only recommended if no custom pcb is used
Breadboard, Plain
Breadboard, Plain
Optional: Only recommended if no custom pcb is used
3D Printer (generic)
3D Printer (generic)
Optional: Needed for the case

Story

Read more

Custom parts and enclosures

PCB

MVP as Step

Topcase

STL

Bottomcse

STL

Case Button Extensions

STL

Case small knob

STL

Case large Knob

STL

Schematics

Schematics MVP Version

The circuit-diagram for the shorter Teensy versions made with Kicad

Fritzing Prototype

Fritzing Version of the schema

Code

Sourcefiles

PlatformIO Project

Credits

mommel

mommel

0 projects • 0 followers

Comments