nootropic design

10 Projects64 Followers2 Following
Contact
Bio

Software engineer and hardware designer, master's degree in computer science, 25 years of experience in software design.

Joined

January 2019

Skills

Arduino, electronics, IoT, Radio, embedded design, web development

Location

Minneapolis, MN, United States

Projects
Create a fun little laser show with a cheap laser module and some old cell phone vibration motors!
Laser Show Motor Controller
7.1K
Investigate how the signal strength from Iridium satellites correlates to the actual positions of Iridium satellites passing overhead.
Iridium Satellite Signal Monitoring
3.1K
Create a fully automated ground station that will receive/decode NOAA weather satellite images and upload them to an AWS S3 website.
Automated Weather Satellite Ground Station
10K
This is a realtime voice changer that uses the Audio Hacker shield for Arduino.
Arduino Audio Hacker Realtime Voice Changer
14K
You’ve probably used WiFi, maybe dabbled with cellular solutions, but what about satellite communication? Yes, it can be done!
Iridium Satellite Communication with Arduino
5.5K
In part 1, I showed how to set up a simple LoRaWAN gateway. Now I’ll demonstrate how to use end devices in a real LoRaWAN application.
Using LoRaWAN End Devices on The Things Network
11K
Setting up a LoRaWAN gateway can seem complicated. I will clearly explain the concepts and show you how I did it!
Configuring a LoRaWAN Gateway for The Things Network
7.3K
Solar-powered weather station that transmits temperature and humidity readings over LoRa, and a base station that publishes the data.
Solar-Powered LoRa Weather Station
4.6K
Products24+ Add products
Arduino IDE
3 projects
Node-RED
3 projects
Arduino UNO
2 projects
Channels20+ Add channels
Internet of Things
Top 5% Contributor
Arduino
Top 10% Contributor
The Things Industries
Top 10% Contributor
Adafruit
Top 25% Contributor
Amazon Web Services
Top 25% Contributor