Hardware and Software products

LEGO+ is a LEGO DC Motor Driver module. It’s built in MEGA328 chip for driving and manage each motor port.

M5Stack New LEGO Motor Adapter Cable

We’ve updated the Simple board to create the LilyPad USB by replacing the classic ATMega328 with the new ATMega32U4.

This simple board holds a 20mm coin cell battery (such as a CR2032) and gives you four connection points (two positive and two negative).

The LilyPad Design Kit (LDK) is a great way to get started with e-textiles. The LDK includes everything you need to complete 6 simple exp...

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another

A new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled or broken down.

One of the great features of these end mounts is the ability to mount to the ends as well as the bottom.

The LinkIt™ Connect 7681 development board provides you with easy access to the five GPIO pins and one UART port — each with an LED — of the

LinkIt MT3332 Module is a low-cost and low-power consumption GNSS module.

Co-design by Seeed and MTK High performance board for wearable and IoT Rich - Features Rich - compatibility Strong extensibility.

3 SIZES! Shaft Collar, Set Screw Type. Great for use on ACME threaded rod or smooth shaft.

If you are looking to map pressure over a 1.25in area, this is the one.

LoRa is a module with small LoRa module named Ra-02.

LoRa Raspberry Pi Hat is an extension for Raspberry Pi that lets you send data over long distances with an extremely low data rate.

Get your proof of concept up and running in hours, not weeks with our pre-configured hardware, connectivity, and Losant resources.

The LSM303DLH is a triple axis accelerometer combined with a triple axis magnetic sensor.

Bring all the history of video gaming in the palm of your hands.

M5Stack Official M5GO Watch Strap Nylon Soft Replacement Strap

CoreInk is a brand new E-ink display in the M5Stack cores range.

NCIR_HAT is an M5StickC compatible infrared sensor.

NeoFlash HAT is specifically designed for M5StickC, it is an RGB LED matrix.

RS485-HAT is a TTL to RS485 converter for M5StickC.

Reliable 24/7 remote condition monitoring for motors, pumps, gear boxes, fans, and more.

You may be the greatest living banana-pianist, but how will you ever know if you don’t make yourself a banana piano? Good news, that proj...

Small enough to fit on your keychain or in your pocket, Makey Makey GO promises to inspire even more STEM projects than the original!

Allow developers to quickly prototype their IoT device concept

Interfaces the MAX11205 16-bit ADC to any system that utilizes Pmod™-compatible expansion ports configurable for GPIO interface.

Implement ultra low-power, AI solutions using a MAX78000 Arm Cortex M4F processor with a Convolutional Neural Network accelerator.

A reference design with a Pmod™ adapter for the Arduino platform that addresses incompatibility issues in prototyping platform standards.

Quickly develop prototypes and proof of concept using the mcThings platform without the need for soldering!

The MetaHealth is our fitness, medical, and health tracking solution. The MetaHealth board comes with a water-resistant Band, Battery, Bl...

OpenBuilds Chrome Steel V Wheel is great for use with any hard V Rail Linear Guide System.

Great for use with any hard V Rail Linear Guide System.

MetaMotion is our motion tracking and fitness solution. The MetaMotion R board comes with a Case, Wearable accessory, a rechargeable Batt...

A DC-DC adjustable step-down (buck) converter that is designed to deliver a substantial amount of current to very demanding loads

MICO makes it easy for Arduino users to create projects using cell phones

The MicroSD Module reads and writes high-density media from microSD cards. The Module ships with a 2GB microSD card.

Accelerates complex prototyping by interconnecting a MicroZed SOM and industry-standard FMC Modules.

This kit is a versatile platform for industrial networking applications. Get your Zed on the net!

MindSphere is a powerful IoT operating system with data analytics, connectivity capabilities, tools for developers, applications and service

The Mini Dock for the Onion Omega is designed to power your Omega for applications that do not require GPIO pins.

The Xilinx Zynq®-7000 All Programmable SoC Mini-ITX Development Kit provides a complete development platform for designing and verifying ...

Features Single Winding, For Signal Switching,Bifurcated Contact ,Maximum Switching Capacity 4.2A 700 VAC

Mini-Relay DPDT 2vDC, 8Pin 1A - For signal switching,Bifurcated Style,Ultra high sensitivity,Surge strength 1500 V

This plate enables end-to-end mounting that makes up the Mini V system. Works with the OpenBuilds Mini V Wheels and the Xtreme Mini V Wheels

You can use this Mini V Gantry to ride on any 20mm side of the V-Slot rail system.

These shims can be used for spacing on many applications, including in the Mini V Wheel Kits.

Primarily designed for Dragonboard 410c

An iPad app that automatically connects to Max and mirrors your interface.

ARM-Powered Ethernet System-on-Module

Modulowo® Explore™ E is development board for Intel® Edison designed for easy development of Internet of Things projects (IoT)

Cellular IoT module supporting LTE-M and NB-IoT

Node-red integration - simply build your own flows for your Voice Channel and define what happens whenever Moni hears your trigger pattern

The best motor controller you can buy for your Raspberry Pi

Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever.

The MPLAB Xpress PIC16F15376Evaluation Board supports the flexible, cost-effective PIC16F153xx family of MCUs.

Example of the company’s most innovative efforts

Open source software which can be freely remixed, extended and improved.