System-on-chip solution including SIGFOX related protocol handling for modem operation
AVR® microcontroller core with embedded firmware, SIGFOX, protocol stack and ID/PAC
Supports uplink operation, i.e. transmit data telegram to SIGFOX base stations
Operating frequency range: 868.0MHz to 868.6MHz
Low current consumption: 32.7mA during telegram transmit with +14.5dBm TX output power
Typical OFF mode current: 5nA (maximum 600nA at VS= +3.6V and T = +85°C)
Data rate: 100bit/s with DBPSK modulation
SPI interface for TX data access and transmitter configuration
Event signal indicates the status of the IC to an external microcontroller
Power-up (typical 10ms OFF mode -> IDLE mode)
Supply voltage ranges 1.9V to 3.6V and 2.4V to 5.5V (SIGFOX compliant supply range 3V±5% and 3.3V to 5.5V)
Temperature range –40°C to +85°C
ESD protection at all pins (±4kV HBM, ±200V MM, ±750V FCDM)
Small 5x5mm QFN32 package/pitch 0.5mm
The ATA8520 is a Transmitter IC for operation in the 868MHz SIGFOX network. It can be used to provide equipment for the Internet of Things (IoT) and other machine-to-machine communication using an air interface to the SIGFOX proprietary network. Industrial and consumer applications include environmental sensors, smart meters, patient monitors, home automation and building security systems.
The ATA8520 incorporates an RF front end, a digital baseband and a microcontroller in a single chip. Firmware stored in internal memory supports the chips' operations, including handling of the SIGFOX protocol. A serial peripheral interface provides for external control and configuration.
The single chip solution provides extreme low power consumption of 32.7mA current at +14.5dBm output power and 5nA in Off mode current. The Supply-voltage range is 1.9-3.6V.
Please visit the full parametric chart. If you still cannot find the
chart you are looking for, please complete our
Website
Feedback Form
to notify us of this issue.