Orange Pi 3 LTS is an open-source single-board computer with dual-band wireless WiFi and Bluetooth 5.0 .It is highly compact with a dimension of 56X85mm.
Product introduction
-
USB2.0
-
USB3.0
-
2GB LPDDR3 SDRAM
-
8GB EMMC Flash
-
Type-C
-
HDMI output
-
WiFi
-
Bluetooth 5.0
Orange Pi 3 LTS uses the Allwinner H6 SoC, and has 2GB LPDDR3 SDRAM, 8GB EMMC Flash. It can run Android 9,Ubuntu,Debian. Orange Pi 3 LTS offers a range of different ports, including HDMI output, 26pin headers, Gbps Ethernet port,1*USB 3.0, 2* USB2.0,etc. It is powered through Type-C. It is a good choice for applications that need strong networking perfomance.

Orange Pi 3 LTS is for anyone who wants to start creating with technology- not just consuming it. lt's a simple, fun, useful tool that you can use to start taking control of the world around you.
-
WiFi+Bluetooth
Dual-band wireless WiFi+Bluetooth 5.0, Fast networking
Orange Pi 3 LTS comes with Gigabit Ethernet, along with onboard wireless networking and Bluetooth. -
8GB EMMC Flash
8GB EMMC Flash to meet users' higher demand for storage capacity
USB 3.0
Orange Pi 3 LTS has upgraded USB capacity: along with two USB 2 ports,you'll find one USB 3 port, which can transfer data up to ten times faster.

Model |
Orange Pi 3 |
Orange Pi 3 LTS |
Hardware features | ||
SOC |
Allwinner H6 64bit |
Allwinner H6 64bit |
CPU architecture |
Cortex™-A53 |
Cortex™-A53 |
CPU frequency |
1.8GHz |
1.8GHz |
Onboard Storage |
![]() ![]() |
![]() ![]() |
Core number |
4 |
4 |
Memory bus |
LPDDR3 |
LPDDR3 |
Memory |
![]() ![]() |
![]() ![]() |
WiFi+BT5.0 |
![]() ![]() |
![]() ![]() |
network |
10M/100M/1000M Ethernet |
10M/100M/1000M Ethernet |
USB |
![]() ![]() |
![]() ![]() |
PCB size |
![]() ![]() |
![]() ![]() |
Power interface |
![]() ![]() |
![]() ![]() |
PMU |
Yes |
Yes |
PCIE |
Yes |
- |
Software features | ||
OS |
![]() ![]() |
![]() ![]() |
OrangePi 3 VS OrangePi 3 LTS - Dimension |
Model |
|
Orange Pi 3 |
Orange Pi 3 LTS |
Hardware features | |
SOC |
|
Allwinner H6 64bit |
Allwinner H6 64bit |
CPU architecture |
|
Cortex™-A53 |
Cortex™-A53 |
CPU frequency |
|
1.8GHz |
1.8GHz |
Onboard Storage |
|
![]() ![]() |
![]() ![]() |
WiFi+BT5.0 |
|
![]() ![]() |
![]() ![]() |
network |
|
10M/100M/1000M Ethernet |
10M/100M/1000M Ethernet |
USB |
|
![]() ![]() |
![]() ![]() |
PCB size |
|
![]() ![]() |
![]() ![]() |
Power interface |
|
![]() ![]() |
![]() ![]() |
PMU |
|
Yes |
Yes |
PCIE |
|
Yes |
- |
Software features | |
OS |
|
![]() ![]() |
![]() ![]() |
OrangePi 3 VS OrangePi 3 LTS - Dimension |

Hardware specification
CPU | Allwinner H6 Quad-core 64-bit 1.8GHz high-performance Cortex-A53 processor |
GPU |
• High-performance multi-core GPU Mali T720 • OpenGL ES3.1/3.0/2.0/1.1 • Microsoft DirectX 11 FL9_3 • ASTC(Adaptive Scalable Texture Compression) • Floating point operation greater than 70 GFLOPS |
Power management chip | AXP805 |
RAM | 2GB LPDDR3 (shared with GPU) |
Onboard Storage | • Micro SD card slot • 8GB EMMC Flash |
Onboard Network |
• YT8531C Chip • Support 10/100M/1000M Ethernet |
Onboard WiFi+Bluetooth | • 859 Chip • Support IEEE 802.11 a/b/g/n/ac • Support BT5.0 |
Video Output | • HDMI 2.0a • TV CVBS Output |
Audio output | • HDMI Output • 3.5mm Audio Port |
Power Source | 5V3A Type-C |
USB | 1* USB 3.0 HOST、2* USB 2.0 HOST |
Low-level peripherals | 26pin connector with1* I2C, 1*SPI, 1*UART &Multiple GPIO Ports |
Debug serial port | UART-TX、UART-RX & GND |
Button | Power Button (SW4) |
LED | Power LED& Status LED |
IR Receiver | Support IR Remote Control |
Supported OS | Android 9.0、Ubuntu、Debian |
Appearance specification introduction
Dimension | 56mm*85mm |
Weight | 45g |
Top view

Bottom view

Orange Pi 3 LTS v1.2 pinout diagram

-
Completely open source maker artifact
-
Orange Pi 3 LTS runs Android
-
Orange Pi 3 LTS runs Ubuntu
-
Orange Pi 3 LTS runs Debian
-
Product display
-
Front
-
Back
-
45° angle
-
45° angle
What can l do with Orange Pi 3 LTS?
You can use it to build-…
Pretty much anything else, because Orange Pi 3 LTS is open source