4.9/ 5.0
99% pembeli merasa puas
136 rating • 31 ulasan
5(130)95.59%
4(5)3.68%
3(0)0%
2(0)0%
1(1)0.74%
Atur jumlah dan catatan
Stok Total: 481
Subtotal
Rp40.000
NodeMCU LoLin V3 Lua CH340G ESP8266 ESP-12E Development Board
Rp40.000
- Kondisi: Baru
- Min. Pemesanan: 1 Buah
- Etalase: Semua Etalase
Ready gambar pertama
NodeMCU LoLin V3 Lua CH340G ESP8266 ESP-12E Development Board
Overview
Uses CH340G instead of CP2102.
NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms.
Communication interface voltage: 3.3V.
Antenna type: Built-in PCB antenna is available.
Wireless 802.11 b/g/n standard
WiFi at 2.4GHz, support WPA / WPA2 security mode
Support STA/AP/STA + AP three operating modes
Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD0: 1 channel ADC
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Current: continuous transmission: 70mA (200mA MAX), Standby: 200uA
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Remote firmware upgrade (OTA)
Support Smart Link Smart Networking
Working temperature: -40 ~ + 125
Drive Type: Dual high-power H-bridge driver
Flash size: 4MByte
Dimension: 31x58mm
Tutorial Instructable: https://www.instructables.com/id/Getting-Started-With-ESP8266LiLon-NodeMCU-V3Flashi/
NodeMCU LoLin V3 Lua CH340G ESP8266 ESP-12E Development Board
Overview
Uses CH340G instead of CP2102.
NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms.
Communication interface voltage: 3.3V.
Antenna type: Built-in PCB antenna is available.
Wireless 802.11 b/g/n standard
WiFi at 2.4GHz, support WPA / WPA2 security mode
Support STA/AP/STA + AP three operating modes
Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)
D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA
AD0: 1 channel ADC
Power input: 4.5V ~ 9V (10VMAX), USB-powered
Current: continuous transmission: 70mA (200mA MAX), Standby: 200uA
Transfer rate: 110-460800bps
Support UART / GPIO data communication interface
Remote firmware upgrade (OTA)
Support Smart Link Smart Networking
Working temperature: -40 ~ + 125
Drive Type: Dual high-power H-bridge driver
Flash size: 4MByte
Dimension: 31x58mm
Tutorial Instructable: https://www.instructables.com/id/Getting-Started-With-ESP8266LiLon-NodeMCU-V3Flashi/
Beli di aplikasi, makin banyak promo!
Scan QR-nya untuk lihat barang ini di aplikasi Tokopedia. Bebas ongkir, lho~
Ada masalah dengan produk ini?
