You are here:
  1. Home
  2. LoRa®
  3. LoRa Gateway
  4. HT-M7603 Indoor LoRa Gateway

Summary

HT-M7603 is a high cost-effective indoor standard LoRaWAN gateway, which can be used independently or as a blind filling gateway. With simple configuration, it allows you to bridge LoRa wireless networks to IP networks and different network servers via Wi-Fi or Ethernet.

This gateway has a sleek, contemporary design. It is wall-mounted, can be easily placed anywhere indoor to ensure that it provides adequate signal coverage.

Main Features

  • MT7628 MCU, SX1303 + SX1250 Chip
  • Wi-Fi and Ethernet supported
  • Maximum output: 27 ± 2dBm
  • The power supply voltage:5V
  • Support LoRaWAN Class A, Class C, custom MQTT protocols

Specifications

ParametersDescription
Parameters MCUDescription MTK7628
Parameters LoRa ChipsetDescription SX1303 + SX1250
Parameters Multi-channelDescription Eight (8) uplink, one (1) downlink.
Parameters FrequencyDescription 470~510/863~870/902~923MHz
Parameters Wi-FiDescription IEEE 802.11 b/g/n 2.4GHz
Parameters LoRa RX SensitivityDescription -125dBm @125KHz/SF7
-139dBm @125KHz/SF12
Parameters EthernetDescription 10/100M
Parameters Max. TX PowerDescription +27 ± 2dBm
Parameters Supply VoltageDescription +5V
Parameters Operating TemperatureDescription -20 ~ 70℃
Parameters Operating HumidityDescription 10%～90%, no-condensing
Parameters DimensionsDescription 116*65*30 mm

Description

Easy config

Step. 1
Step. 2
Step. 3
Power ON device
Config network
Connect to a LoRaWAN anetwork server

For more detailed configuration methods, please refer to the HT-M7603 Quick Start documentation

High light

Low cost blind filling gateway

With its low cost and compact size, the HT-M7603 can be installed anywhere indoors and can be used independently or as a blind filling gateway.

Wall fixing

With the wall fixing kit, the equipment can be easily fixed to the wall

Supports standards LoRaWAN and custom MQTT

By selecting Gateway Mode, the M7603 can switch working modes, supporting both LoRaWAN and custom MQTT.

Low cost blind filling gateway

With its low cost and compact size, the HT-M7603 can be installed anywhere indoors and can be used independently or as a blind filling gateway.

Wall fixing

With the wall fixing kit, the equipment can be easily fixed to the wall

FAQ

No, because different RF frequencies require different impedance matching, and the operating frequency band of the device must be within the range supported by the hardware.

The following are references for the corresponding working frequency bands of each version:

  • 470~510 Version: CN470.
  • 863~870 Version: EU868, IN865.
  • 902-928 Version: US915, AU915, AS923, LA915, KR920 (LBT).

Yes. But there is no LBT support in the 902~928 version, but if your order address is in Korea, our staff will contact you to confirm if LBT support is needed.

  1. Please check whether the node frequency band/channel is consistent with the gateway.
  2. Please check whether LoRa and WiFi antenna are connected incorrectly.
  3. Maybe the node has bad RF.
  1. A common error is to output the wrong WiFi name or password in the configuration page of the gateway.
  2. If you change the NS of the gateway connection, you need to restart the gateway.

NO.

Docs & Resource

Packing list

The default packing list without selecting any accessories is as follows:

ItemQuantity
Item HT-M7603 host deviceQuantity x1
Item Suction Cup Glue Rod AntennaQuantity x1
Item 5V 2A Power AdapterQuantity x1

HT-M7603 Indoor LoRa Gateway

Original price was: $119.00.Current price is: $89.00.

Add an Accessories

Contact