The camera module is powered from a single +3.3V power supply. An external oscillator provide the clock source for camera module XCLK pin. With proper configuration to the camera internal registers via I2C bus, then the camera supply pixel clock (PCLK) and camera data (Data[9:0]) back to the host with synchronize signal like HREF and VSYNC. The OV7670 camera module is a low cost 0.3 mega pixel CMOS color camera module, it can output 640x480 VGA resolution image at 30fps. The OV7670 camera module build in onboard LDO regulator only single 3.3V power needed and can be used in Arduino, STM32,Chipkit, ARM, DSP , FPGA and etc. Feature: Optical size 1/6 inch Resolution 640x480 VGA Onboard regulator, only single 3.3V supply needed Mounted with high quality F1.8 / 6mm lens High sensitivity for low-light operation VarioPixel method for sub-sampling Automatic image control functions including: Automatic Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC) Image quality controls including color saturation, hue, gamma, sharpness (edge enhancement), and anti-blooming ISP includes noise reduction and defect correction Supports LED and flash strobe mode Supports scaling Lens shading correction Flicker (50/60 Hz) auto detection Saturation level auto adjust (UV adjust) Edge enhancement level auto adjust De-noise level auto adjust Applications: Cellular phones,PDAs,Toys,Other battery-powered products Packing included: 1 x 640x480 0.3 MegaPixelS VGA CMOS OV7670 Camera Module
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Non ho ancora provato questa camerina, tuttavia segnalerei il fatto che a parte gli header e la parte meccanica della camera, il circuito sotto e sopra non corrisponde con le foto dimostrative, perciò spero che funzioni.
Non ho ancora provato questa camerina, tuttavia segnalerei il fatto che a parte gli header e la parte meccanica della camera, il circuito sotto e sopra non corrisponde con le foto dimostrative, perciò spero che funzioni.