900HP-S3B Long Range Wireless Mesh Modem with USB Interface
Please note that images above may contain product not included with purchase.
Highlights
- Mounts as a Virtual COM Port
- Wireless Communications up to 2 Miles
- Programmable Baud Rate
- Plug In, Open the COM Port and Start Sending Commands
- Compatible with All 900HP-S3B Devices
- LED Status Lights Indicate Communication
- USB Powered
- Includes USB Cable
- Includes Mountable Enclosure
Long Range Wireless Sensors
Our long range wireless enterprise series sensors are an easy to use and reliable start to any data aggregation application. This video will demonstrate how they work, what they do, and how to use them.
900HP-S3B Wireless Modem
900HP-S3B Modem make Wireless Control EASY
Plug In, Open the COM Port and Start Sending Commands
Two Miles of Wireless Control From the USB Port on Your Computer!
Wireless Communication
Communicating with a Wireless Device does NOT have to be complicated. Our line of 900HP-S3B modems allow first time users to communicate with ANY 900HP-S3B device on the site with a absolute maximum possible range of 28 miles (using high-gain antennas).
Here’s how it works
Plug the 900HP-S3B Modem into your computer and install the drivers. The 900HP-S3B modem will mount as a COM port on your PC. Next, talk to the COM port as though you were communicating with a RS-232 serial device that is directly connected to your PC. That’s all there is to it!!!
900HP-S3B Modems offer wireless 2-way communications, compatible with any 900HP-S3B device. This modem is Powered by the USB Port. The U900HP-S3BMSR_ZIGMO includes USB Cable, Antenna, and Enclosure.
900HP-S3B modules offer 100% emulation of a COM port and offer a completely transparent communication layer. We have chosen these communication methods because we believe they offer the best compatibility and quickest implementation time.
Configuration Options
Standard compatible with NCD Industrial Devices
This configuration will allow you to monitor and control devices from the NCD Industrial product line.
Standard compatible with NCD Industrial Devices
This configuration will allow you to monitor and control devices from the Enterprise Solutions product line.
Mechanical Drawing
900HP-S3B Wireless Compatibility Notes
Notice: Compatibility Notes Does NOT Apply to the Following Products:
- NCD Enterprise Solutions
- NCD Wireless Sensors
- NCD Enterprise Modems and Gateways
Notice: Compatibility Notes Applies to NCD Industrial Products, Including Fusion, ProXR, ProXR Lite, Taralist, and Reactor Series Products.
Compatibility Notes
When using an 900HP-S3B communication module, it is essential that you use the ZIGMO_PCB to configure the module settings. Long-Range wireless sensors may be programmed over the air without removing the communications module.
A 900HP-S3B Modem or a gateway of some kind that support the 900HP-S3B communications module will also be required.