Connector Type | / |
---|---|
Contact Material | / |
Contact Type | / |
Current Rating | 10 Amps |
Mounting Type | / |
Brand | SainSmart |
Operation Mode | Automatic |
Coil Voltage | 5 Volts |
Contact Current Rating | 10 Amps |
Maximum Switching Current | 10 Amps |
Minimum Switching Voltage | 5 Volts |
Number of Terminals | 3 |
Specification Met | / |
UPC | 065973900658 885970089893 885776099362 |
Global Trade Identification Number | 06952131721306, 00065973900658 |
Item model number | 101-70-100 |
Item Weight | 1.06 ounces |
Product Dimensions | 4.79 x 0.69 x 0.1 inches |
Item Dimensions LxWxH | 4.79 x 0.69 x 0.1 inches |
Manufacturer | SainStore Inc. |
ASIN | B0057OC6D8 |
Is Discontinued By Manufacturer | No |
Date First Available | June 23, 2011 |
SainSmart 2-Channel Relay Module
We don't know when or if this item will be back in stock.
Connector Type | / |
Contact Material | / |
Contact Type | / |
Current Rating | 10 Amps |
Mounting Type | / |
About this item
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED's for Relay output status
Featured items to consider
Compare with similar items
This Item ![]() SainSmart 2-Channel Relay Module | Recommendations | |||||
Try again! Added to Cart spCSRF_Treatment Add to cart | Try again! Added to Cart spCSRF_Treatment Add to cart | Try again! Added to Cart spCSRF_Treatment Add to cart | Try again! Added to Cart spCSRF_Treatment Add to cart | Try again! Added to Cart spCSRF_Treatment Add to cart | ||
Price | Currently unavailable. | $8.99$8.99 | $5.98$5.98 | $7.99$7.99 | $9.99$9.99 | $7.99$7.99 |
Delivery | — | Get it as soon as Tuesday, Jul 1 | Get it as soon as Tuesday, Jul 1 | Get it as soon as Tuesday, Jul 1 | Get it as soon as Tuesday, Jul 1 | Get it as soon as Tuesday, Jul 1 |
Customer Ratings | ||||||
Sold By | — | Aediko US | Ferwooh-US | EC Buying | HiLetgo | SunFounderDirect |
contact type | / | Normally Open, Normally Closed | — | Normally Closed | Normally Closed & Normally Open | Normally Open |
max switch current | 10 amps | 10 amps | 10 amps | 10 amps | 30 amps | 10 amps |
specification met | / | Ma | — | — | — | 250v 10a (Ac Rating), 30v 10a (Dc Rating) |
— | 250 volts | 250 volts | 5 volts | 24 volts | 5 volts | |
5 volts | 12 volts of direct current | 0.12 volts | — | 5 volts | 5 volts | |
3 | — | — | — | — | — | |
coil voltage | 5 volts | 12 volts | 5 volts | 5 volts | 12 volts | 5 volts of direct current |
mounting type | / | — | Panel Mount | Panel Mount | External Connection | PCB Mount |
operation mode | Automatic | Off | Automatic | Automatic | Automatic | Manual |
Product Description
SainSmart 2-Channel Relay Module
Product information
Technical Details
Additional Information
Customer Reviews |
4.4 out of 5 stars |
---|---|
Best Sellers Rank |
|
Feedback

SainSmart 2-Channel Relay Module
Share:
Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.
Where did you see a lower price?
Fields with an asterisk * are required
What's in the box
From the manufacturer

SainSmart 2-Channel 5V Relay Module
This is a 5V 2-Channel Relay interface board, Be able to control various appliances, and other equipments with large current.
It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .
Features:
- 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current.
- Equiped with high-current relay, AC250V 10A ; DC30V 10A.
- Indication LED’s for Relay output status.
- It activates on low level.
Package Content:
- 1 x SainSmart 2-Channel 5V Relay Module

From the brand

-
How did we get our start?
SainSmart has served the maker community for years. As time went on and the maker movement continued to grow so did our product selection, we continue to provide quality products with great value and performance to our customers.
What makes our products unique?
With our superior quality control and a variety of open hardware supplies, we believe we can provide you with a better shopping experience and guide you through your Maker Journey.
Why do we love what we do?
Ten years of DIY/Maker-centric products has been a great journey! We are glad to play a part in this voyage, bringing value and performance to our customers and “unleash creativity” helping turn their daydreams and weekend projects into reality.
-
Power Tools
-
Welding & Soldering
-
Oscilloscope
-
Woodworking
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonCustomers say
Customers find the relay module works well with various devices, including Raspberry Pi and BeagleBone Black, and is easy to wire up and control via Arduino. They appreciate its construction, with one customer noting the robust screw terminals, and consider it good value for money. The module features indicator lights for relays, and customers like its appearance, with one describing it as an amazing little board. The audio quality receives mixed feedback, with several customers noting it is quite audible.
AI Generated from the text of customer reviews
Customers report that the relay module works well with various devices, including Raspberry Pi, BeagleBone Black, Arduino, and Netduino.
"The relay module works and it is installed in a home automation project...." Read more
"...Pros: o Works as advertised. o Connections to the relays are robust screw terminals...." Read more
"...and setup may not be simple for a beginner, but once understood, it works well and is easy to control via the Arduino...." Read more
"...In extended use the relay performed really well. It is durable lightweight and easy to wire. Pros: 120V 10A switch rating...." Read more
Customers are satisfied with the relay functionality, describing it as a nicely made 2-channel module that works well with Arduino.
"This is a nice little relay board...." Read more
"The 2 pack relay is ideal for Arduino - the logic is backwards it seems but probably good from the stand point should a logic line fail, the relay..." Read more
"...5v to switch, in my testing 3.3v on relay coils was not enough to switch the relay (but did activate the indicator LED.)..." Read more
"Nicely made 2 relay module...." Read more
Customers appreciate the relay module's build quality, noting its good construction, reliability, and nice form factor, with one customer highlighting the robust screw terminals for connections.
"...The Songle relays (SRD 05VDC SL-C) are excellent quality - datasheets are available via a quick search...." Read more
"...Pros: Good Quality Board and Small and Compact form factor Relays are rated 5VDC and 10A @ 125 Volts..." Read more
"...Pros: o Works as advertised. o Connections to the relays are robust screw terminals...." Read more
"...In extended use the relay performed really well. It is durable lightweight and easy to wire. Pros: 120V 10A switch rating...." Read more
Customers find the relay module to be good value for money, with some saying it's worth its weight in gold.
"but it is a nice, cheap relay. You can use it to control low voltage or line voltage (i.e. switch a power outlet on and off) from an Arduino...." Read more
"...Great quality and usefulness for the money!" Read more
"...Overall, this relay board is a great low-cost solution for enabling Internet control of just about anything." Read more
"...Good Circuit. Good Price. For Arduino it works something like a REVERSE...." Read more
Customers like the appearance of the relay module, with one describing it as an amazing little board and another noting that it looks neat.
"but it is a nice, cheap relay. You can use it to control low voltage or line voltage (i.e. switch a power outlet on and off) from an Arduino...." Read more
"As with most Sainsmart products, it's a fine device, well built & reliable...." Read more
"...when my project needed more than one relay and this project made it look neat and made wiring very easy...." Read more
"...well I didn't know what I wanted to do with it at the time but they looked fun! Play very well with the Arduino and Netduino...." Read more
Customers appreciate the indicator lights on the relay module, with one customer specifically noting that the LEDs show when relays are on.
"...A few random notes: - I really appreciate the indicator lights on this board! (power, relay1 on/off, relay2 on/off) -..." Read more
"...Has Relay 1 & 2 Indicators, Power Indicators which are great help Good Separation between Mains Voltage contacts Cons:..." Read more
"...Great for home lighting and automation systems. Indicator lights for the relays. Cons:..." Read more
"...about the sound of the relays, they are quite audible, indication lamps as to relay state is nice." Read more
Customers have mixed opinions about the relay module's audio quality, with some noting it is quite audible and produces a good bit of noise.
"...this relay is mechanical and makes a very audible CLACK when it switches state. Keep that in mind depending on your application! -..." Read more
"...Others have also noted about the sound of the relays, they are quite audible, indication lamps as to relay state is nice." Read more
"...When switching the relay does make a good bit of noise...." Read more
"...Controlled this with an Arduino and provided power to servos, sound amplifiers, and another Arduino. Easy to use and great price." Read more
Top reviews from the United States
There was a problem filtering reviews. Please reload the page.
- Reviewed in the United States on October 4, 2011Pattern Name: Relay ModuleVerified Purchasebut it is a nice, cheap relay. You can use it to control low voltage or line voltage (i.e. switch a power outlet on and off) from an Arduino. I'm using mine with an Arduino to convert a chest freezer into a kegerator by overriding the internal thermostat of the freezer.
The connections to your Arduino (or whatever) are:
VCC - supply voltage. 5V from my Arduino.
IN1 - set to HIGH to set the relay to its "default" state, set to LOW to switch the relay to its alternate state
IN2 - same as IN1, but controls the second relay on the board
GND - ground
A few random notes:
- I really appreciate the indicator lights on this board! (power, relay1 on/off, relay2 on/off)
- this relay is mechanical and makes a very audible CLACK when it switches state. Keep that in mind depending on your application!
- I unsoldered the connection pins and replaced them with wires - if you don't want to do that you'll need some sort of coupler. I'm new to hobby electronics so I'm probably missing some terminology .. essentially the connections to control this relay are in the form of pins (male) on this board, while it has screw-in terminals for the high voltage input/outputs. I unsoldered the pins from this board and replaced with wires, and it works fine.
This was a pain, so had I known I needed to do this before this arrived, I would have looked for a female/female coupler (again, sorry if I'm missing the right terminology)
- Reviewed in the United States on January 17, 2016Pattern Name: Relay ModuleVerified PurchaseI have used 3 of these now, driven by an Arduino Uno. It's a pretty simple module to use.
Each relay has a normally open, normally closed, and common connection. With the relay side up, the order is COM, NC, NO.
I desoldered the pin headers and replaced them with jumper wires. I don't think it's really worth the effort; you will save time with a $2 set of female-female jumpers, female-male jumpers (best for direct connection to Arduino), or female-female pin headers. But if you are going to desolder the pins, make sure to 'tin' them first by adding a bit of fresh solder over the existing joints. This makes it easier to melt the existing joints, which have become oxidized. Then, pull off the plastic part of the header with needlenose pliers. Put the relay upside-down in a clamp, and heat a joint with a soldering iron. When the solder flows, push the pin down with the iron. You won't get it all the way through unless you have a very small iron. Use a solder sucker or solder wick to clean up the excess before reapplying the iron and pulling out the pin with pliers.
The Uno can source 5V and enough current to switch the relay from its digital pins, so leave the jumper on.
- Reviewed in the United States on October 10, 2014Pattern Name: Relay ModuleVerified PurchaseThe relay module works and it is installed in a home automation project. I wish the little jumpers let you specify whether an active high or low signal caused the relay to close in. I used this with an Arduino and in the setup function assert the pin to a high state before you change the mode to an output condition. This way the pin is already high before it gets changed to an output state. Without doing this you may see a brief little flash on the led light when the Arduino is power cycled. When you wish to close the contact then assert the bit to a low state.
- Reviewed in the United States on June 15, 2013Pattern Name: Relay ModuleVerified PurchaseThis is a well-made module. I noticed some misconceptions in the other reviews. I'm an electrical engineer - I'll try to clarify a few points.
The Songle relays (SRD 05VDC SL-C) are excellent quality - datasheets are available via a quick search. The load ratings shown on the relay unit are typically for resistive loads. The Songle data sheet also shows the rating for inductive loads (like motors).
The module draws virtually no current until a relay is energized. Each relay coil draws about 70 mA (milliamps) via the VCC power supply pin at 5 VDC. To energize a relay, the associated input pin on the module has to be pulled low by the microprocessor output driving it. Input current to the pin is just 2 mA. (This current has to be sourced by the microprocessor - most digital outputs can easily handle this load. The Arduino Uno, for example, can source up to 40 mA from its digital I/O pins.)
When relay contacts are described as normally open or normally close, that's the status of the contact(s) when the relay is de-energized (no power to its coil). When the proper voltage is applied to the coil, the contacts switch (a normally open contact, for example, closes).
Great quality and usefulness for the money!
- Reviewed in the United States on February 17, 2013Pattern Name: Relay ModuleVerified PurchaseThis compact relay board is easy to interface to 3.3v microcontrollers, like those on wireless routers and Netduinos, with a little setup.
The relay coils require 5v to switch, in my testing 3.3v on relay coils was not enough to switch the relay (but did activate the indicator LED.)
If your project uses a 3.3v microcontroller, you can still get great results from this relay. The left set of 3 pins come with a jumper across JD-VCC and VCC, causing the relay coils to operate from the VCC supplied on the switching side pin header.
To use the relay board with a 3.3v micro, remove this jumper and save/discard it, connect GND to common power supply negative, supply 5v for relay coils on the pin labeled JD-VCC, and supply 3.3v on either pin labeled VCC. Your 3.3v micro connects to IN1 and IN2, and because of the transistors on the relay board will only switch 3.3v at a low current (about 20 mA.)
As other reviewers have noted, IN1 and IN2 must be pulled LOW to switch the relays. This works out well; micros can generally sink more current than they can source. I was able to control this relay board with the GPIO pins on a TP-LINK MR3020 router without burning out the SoC, supplying the 5v coil power from the USB input. Overall, this relay board is a great low-cost solution for enabling Internet control of just about anything.
Top reviews from other countries
- Greg SmithReviewed in Canada on April 1, 2018
5.0 out of 5 stars Connecting to Raspberry Pi using 3.3V GPIO
Pattern Name: Relay ModuleVerified PurchaseThe Raspberry PI has 3.3V GPIO, and may not like being pulled to 5V on the GPIO. The Raspberry Pi / Broadcom documentation that I could find is incomplete here. Therefore I have modified the relay card to operate with the Raspberry PI GPIO pulled to 3.3V.
Attached relay to Raspberry PI as follows:
- Removed blue jumper
- RP pin 1 (3.3V) to Relay Vcc
- RP pin 2 (5V) to Relay JD-Vcc
- RP pin 11 (GPIO-17) to Relay IN1
- RP pin 6 (GND) to Relay GND
The value of R1 and R4 is 1000ohm, which gives current of approximately = 3mA [(5V-1.3V-0.7V) / 1000ohm] for operating the opto-coupler when driven at 5V.
To operate the Relay from 3.3V, I lowered the values of R1 and R4 (by soldering a 470 ohm resistor in parallel with the 1000ohm) and it works. This gives the opto-coupler about 4mA when driven from 3.3V. (3.3-1.3-0.7) / (470*1000/(470+1000)). Optionally, instead of soldering 470 ohms in parallel, I could have replaced R1 and R4 with 330 ohm resistors.
I connect the Raspberry PI to the modified relay card as described above, and it works good.
-
ゑReviewed in Japan on November 23, 2015
5.0 out of 5 stars 負論理での消費電流と起動時のデジタル出力「HIGH」の設定
Pattern Name: Relay ModuleVerified Purchase停電時に、リレーの接点=閉となるものが必要だったので、先のレビューが参考になりました。
2チャンネルのものを、Arduino UNO R3 互換ボード(SainSmartオリジナルバージョン)と組み合わせて使用して、問題ナシでした。
リレーモジュールは、接点が1組のリレーが2個実装されたもので、デジタル出力「LOW」の時に点灯するLED(赤)が2個実装されており、トランスファー接点なので、1つのデジタル出力で接点=閉/開どちらからでも配線できます。
Arduinoの起動時のデジタル出力が「LOW」のなので、Arduinoと接続されたリレーは、起動時に一斉に動作して、以降、イベント発生時にデジタル出力が「HIGH」となる間以外は、リレーが常に動作しているので、動作リレー分の電流を消費していることになります。
以下、少しでも消費電流を抑える使い方として、
必要なリレーのみ、Arduinoの起動時のデジタル出力「HIGH」とすることで、イベント発生時のデジタル出力が「LOW」の間のみの動作になり、消費電流が低減します。
ピン毎の設定なので、以前の起動時のデジタル出力「LOW」(初期設定ナシ)との混在もできます。
【起動時のデジタル出力「HIGH」の設定(Arduinoのスケッチ)】
2チャンネルのリレーモジュールで、何度か確認しましたが、LED(赤)の点灯とリレーの動作は確認されませんでした。
たぶん、void setup()内の記述と記述順で、抑え込まれていると推測しています。
以下は、イベント発生時にデジタル出力「HIGH」(digitalWrite()「HIGH」の記述)が、既にスケッチされているものとして記載しています。
動作の確認は、設定したピンに該当するLED(赤)の点灯/消灯・リレーの動作音・接点の開/閉が、変更前/後で反対の動作をしていること。
および、全体の動作に異常がないこと。
(1).リレーに接続したピンのdigitalWrite()の記述変更(イベント発生時の記述)
digitalWrite()の記述「HIGH」→「LOW」へ変更します。
(2).void setup()内への記述追加(該当ピンの初期設定)
void setup()内の先頭行付近で、必ずpinMode()の行より以前に、(1)の初期設定としてdigitalWrite()「HIGN」の記述を追加します。
(pinMode()は、void setup()内に記述されているものとします。)
pinMode()は「OUTPUT」=出力の指定なので、この行より以前に記述することで、pinMode()が実行された時点では、既にdigitalWrite()は「HIGN」のため、「LOW」は出力されないと思われます。
(3).コメントの追記
void setup()内へ記述したdigitalWrite()の行に、「// 起動時「HIGH」出力。必ずpinMode()「OUTPUT」以前に記述。」など。
起動時が通常の「LOW」ではなく、また混在もできるので、後々でもわかりやすいコメントがよいと思います。
(4).起動時のデジタル出力「HIGN」→「LOW」への戻し
(1).の記述:「LOW」→「HIGN」へ変更します。
(2).の記述:「//」を行の左端に記述してコメントアウトします。
(3).の記述:コメントアウトなので変更不要です。
4、8、16チャンネルでは動作未確認です。
リレー接点の開/閉動作が入れ替わるので、配線の変更が必要になります。
尚、上記の前に、該当ピンの初期設定として、void loop()内の先頭行にdigitalWrite()「HIGH」を記述して、2チャンネルで確認したところ、Arduinoの起動時に、リレー動作には至りませんが、LED(赤)が瞬時に点灯することが確認できたので(必ず再現)、一瞬「LOW」が出力されていると推測しています。
また、リレーの増加に伴って、digitalWrite()「HIGH」の記述も増えるため、後方の記述ほど、リレー動作に至る可能性が高くなります。
リレー動作に至った接点の接続先では、誤表示や誤制御などが考えられるので、こちらのスケッチはお奨めしません。
《2015年11月25日:修正》ーーーーーーーーーー
内容に誤りや不備・不足があったため、全面的に見直しを行って、タイトルと内容を修正しました。
失礼しました。
- Akash Deep SinghReviewed in Canada on April 25, 2016
5.0 out of 5 stars Good quality relay and its 2 channel. Will buy again for future products.
Pattern Name: Relay ModuleVerified PurchaseThis is a great product. I was looking for a smaller relay with solid build though as I wanted to put it outdoors. I wanted to couple it with my raspberry pi to make a remote garage door opener. I was looking for something small and this relay didnt disappoint either. It worked flawlessly with my raspberry pi. I am still to complete the wiring for garage opener but the relay works. I left it outside for quite a long time and it still worked. Thats another brutal test it passed.
I guess there is 4 channel model as well but I wanted a dual channel and it solved my purpose. Very haply with the purchase. The price was also very reasonable compared to the quality and it solved my purpose.
will post some pictures once I finish the install.
-
SHOOT_UPReviewed in Japan on January 1, 2016
5.0 out of 5 stars raspberry pi GPIO出力 3.3V で使用可能
Pattern Name: Relay ModuleVerified Purchase自宅にあったリレースイッチは5V出力でないとスイッチできなかったので購入しました。3.3vで動作するリレースイッチなので、raspberry pi で使用でき満足です。
-
安物買いReviewed in Japan on June 26, 2015
5.0 out of 5 stars FlashAirとの組み合わせで使っています
Pattern Name: Relay ModuleVerified Purchase最初RaspBerry PIで動かしていましたが東芝のFlashAirのGPIO機能でも使えないかと思い試したところFlashAirからの出力で直接制御する事ができました。
負論理(LOWレベルでリレー閉)で動くのでソフトで対応する必要があります。ジャンパー線で正論理不論理が切り替えられるという事はないのですが。