TP229 Capacitive Touch Module have 16 capacitive inputs. The module has two working modes. Module use only 16 key mode. For connection to microcontrollers (Arduino, Raspberry, STM) use the I2C interface.
To capacitive inputs can connect special capacitive KeyPad, any metal objects, prints of electronic ink or pens, fruits.
In our catalog have 16 key touch KeyPad or disk KeyPad.
Related Posts
STM32F103C8T6 – 64KB Flash, STM32 ARM Cortex-M3 Mini System Dev.board (STM firmware)
Specifications Microcontroller ATmega2560 USB-TTL converter CH340G Power Out 3.3V-180mА5V-800mА Power IN. USB 5V Power IN. VIN/DC Jack 6-12V…
ESP01 SSR AC Relay module, AC A4-600V – for smart home and DIY projects
Product Overview This WiFi IoT ESP01 SSR Relay based and do control on ESP-01 ESP8266 microcontroller WIFI module.…
RFID module, MFRC522 with UART, SPI, I2C interface
The MFRC522 is an RF Module that consists of an RFID reader, RFID card and a key chain.…
WIFI NodeM ESP8266, 32M flash, CH340G
Specifications Microcontroller ESP8266 USB-TTL converter CH340G Power Out 89 mW Power IN. USB 5V (500mA max.) Power IN. VIN/DC…