Hardware and Software products

MSP430FR5969 FRAM LaunchPad Development Kit

DevKit with sensors on board, Microsoft Azure IoT connectivity ready, Arduino-compatible

The Nexys A7 is the new name for our popular Nexys 4 DDR board, now available in two FPGA densities!

Nicla Voice allows for easy implementation of always-on speech recognition on the edge with Syntiant’s NDP120 Neural Decision Processor.

*DISCONTINUED* The nRF24 Module is used for wireless communication without WiFi. It's great for low-power mesh communication between Tess...

ObjectBlocks IOT Platform consists of a visual programming interface and data dashboard for IOT products

ObjectBlocks is an Arduino shield that provides bluetooth and Wifi capability - and works seamlessly ObjectBlocks IOT platform.

OpenCV AI Kit (OAK), an MIT-licensed open source software and Myriad X-based hardware solution for computer vision at any scale.

The secure, easy-to-use micro PLC with Industrial IoT capabilities, supporting Arduino programming experience and PLC standard languages.

The Pantri API is the place to send grocery replenishment data to, from whatever Smart device you can dream up!

Provides 3-pin interfaces, Allowing easy connection of motors, sensors or I/O devices to PHPoC

With Stepper Motor Controller Ⅱ, you can control a stepper motor more precisely. It supports microstepping up to 1/32.

The Pmod AD2 is an analog-to-digital converter powered by the Analog Devices AD7991.

The Pmod CLS is a character LCD module driven by the Atmel ATmega48 microcontroller.

The Pmod CON3 can be used to interface with up to four small servo motors that deliver anywhere from 50 to 300 ounce/inches of torque.

The Pmod DA4 is an 8 channel 12-bit Digital-to-Analog Converter run via the Analog Devices AD5628.

The Pmod MIC3 is a MEMS microphone that allows users to adjust the incoming volume to the system board with the small potentiometer.

The Pmod STEP provides a four channel drive for a stepper motor via the ST L293DD.

ProtoStax for Raspberry Pi A+ gives you a modular prototyping enclosure that can fit a board with the Raspberry Pi Model A/A+ footprint

With Semtech® SX1276 at its core, the RAK811(WisDuo LPWAN Module) takes advantage of all LoRa® features.

The Raspberry Pi 2 Model B is the second generation Raspberry Pi.

Raspberry Pi 4 Model B is the latest product in the popular Raspberry Pi range of computers. It offers ground-breaking increases in processo

Jetson-10-1-A0 is a hand-size edge AI box built with Jetson Nano production module, rich set of IOs, aluminum case, passive heatsink, pre-in

Jetson-20-1-H2 is a hand-size edge AI box built with Jetson Xavier NX 16GB module, rich set of IOs, aluminium case, cooling fan, pre-install

The Relay Expansion allows you to use your Omega to interface with various electronic appliances.

A great duo of products in one box to help you get you started with and teach you the basics of RFduino.

The RN2483 is a fully-certified 433/868 MHz module based on wireless LoRa® technology.

RoboCORE is a Husarion cloud-enabled robotic controller with one purpose: build advanced robots as fast as possible.

The RobotGeek IR Transmitter can send data to various devices in your sights!

64-bit 4K60P HDR Single Board Computer: Gigabit, USB 3.0 and up to 4GB LPDDR3

The Multipurpose sensor can detect open/close, vibration, orientation, angle, and temperature all in one.

Screenly OSE is the oldest and most popular open source digital signage platform for the Raspberry Pi.

Servo is a servo-motor driver module which can drive 12-way servo motors simultaneously.

IMU 9DOF

TI Micrcontrollers with integrated wireless connectivity

Invest once in the SimpleLink software development kit (SDK) and use throughout your entire portfolio with 100 percent code portability.

NeoPixel is a RGB LED Cable unit.

Gesture Sensor (APDS-9960)

An SMA to Alligator Clip Cable for a clean signal connection.

Solar Power Manager is a complete small power and high-efficiency solar power management module.

Extra rechargeable lithium polymer smart battery for the 3DR Solo; charger not included.

Use data collected in SORACOM Harvest to create dashboards combining multiple graphs, tables, maps and more

Take the SoundTouch® experience to the next level.

The SparkFun 9DOF MPU-9150 is the world’s first 9-axis MotionTracking MEMS device designed for the low power, low cost, and high performa...

Your 5V system can wield great power with this big, beefy relay board. How does 10A on the NC contacts and 20A on the NO contacts at 220V...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

The Intel® Edison is an ultra small computing platform that will change the way you look at embedded electronics. Each Edison is packed w...

This breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than our FM Tuner Evaluation Board. If you...

Turn your Arduino into a position-tracking, speed-monitoring, altitude-observing wonder logger.

56 red LEDs arranged in a nice 8x7 grid. Requires eight pins, while the library supports any ATmega 168 and 328-based Arduino device.

This board allows you to utilize a microSD card at Arduino’s SD library’s top speed on a 5V system.

The SparkFun Mini Inventor’s Kit (SMIK) is a great way to get started with programming and hardware interaction with the Arduino programm...

The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and...

If you’re ready to step your Arduino game up from older 8-bit/16MHz microcontrollers, the SparkFun SAMD21 Dev Breakout is a great landing...

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that ...

We have no idea what USB device you're hooking up to, but if you need to add a miniUSB/USB Mini-B connector to your breadboard - here it is.

This is the latest version of our Venus GPS board; the smallest, most powerful, and most versatile GPS receiver we carry. It’s based on t...

This is the SparkFun XBee Explorer Dongle unit for the Digi XBee module line. With the XBee Explorer Dongle you can plug the unit directl...

Stepper Motor Controller is a Smart Expansion board for PHPoC Shield, which is designed to smoothly and precisely control a step motor.