Hardware and Software products

This is the FreeSoC2 Development Board, SparkFun’s take on the PSoC5LP ARM Cortex. The PSoC (Programmable System on a Chip) brings togeth...

The FUSB302 targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmability.

32-bit general-purpose, high-performance, and low-power MCU powered by the ARM® Cortex®-M3 core

gen4 2.4" Diablo16 Intelligent Display Modules, Resistive Touch, without Cover Lens Bezel

gen4 2.8" Diablo16 Intelligent Display Module,Resistive Touch, without Cover Lens Bezel

triple-network WiFi, BLE and cellular LTE-CAT M1/NB1 MicroPython enabled IoT development board

This is a dissolved oxygen sensor kit, which is compatible with Arduino microcontrollers.

This Arduino Rotation Potentimeter Sensor is a multi-ring rotation sensor. It is based on multi-turn precision potentiometer.

You can directly plug it on our IO Expesion Shield V7. Just vibrate this sensor, Arduino can receive a digital signal.

This is a small form factor IR camera capable of tracking up to four heat/IR sources.

The MMA7361 from Freescale is a very nice IMU sensor with easy analog interface.

This encoders kit are designed for TT motors. It provides the rotation degree of the wheels.

This sensor is based on non-dispersive infrared (NDIR) technology and has good selectivity and oxygen-free dependency.

This is the latest voice recorder module with integrated record and play functions.

More cost-effective monochrome backlight derivative for you, i.e.,

The Grove - 1-Wire Thermocouple Amplifier is a thermocouple-to-digital converters with 14-bit resolution and cold-junction compensation.

This module is based on a 2-Coil Latching Relay

12 bit, digital, triaxial acceleration sensor with smart on-chip motion and position-triggered interrupt features.

The Grove - 6-Axis Accelerometer&Gyroscope(BMI088) is a 6 DoF(degrees of freedom) High-performance Inertial Measurement Unit(IMU) .

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors

The Grove ecosystem has been evolving since the introduction of it and now we are proud to bring you the Grove – Breadboard!

The Electricity sensor module is based on the TA12-200 current transformer which can change large alternating current into a small amplitude

The sensor on Grove - Gesture is PAJ7620U2 that integrates gesture recognition function with general I2C interface into a single chip

Grove - Haptic motor is a Grove module integrated with DRV2605L which will give your project more feelings.

I2C Thermocouple Amplifier (MCP9600) is a thermocouple-to-digital converter with integrated cold-junction and I2C communication protocol.

Based on MPU-9250 and BMP280. which combines a 3-axis gyroscope, 3-axis accelerometer, 3-axis magnetometer and a Digital Motion Processor

A 9 Degrees of Freedom IMU (Inertial measurement unit) which combines gyroscope, accelerometer and electronic compass.

This four-in-one sensor allows you to collect the data from the ambient environment and transfers over the I2C bus.

The Grove - Optical Rotary Encoder(TCUT1600X01) is a transmissive sensor that includes an infrared emitter and two phototransistor detectors

Carrying a GrovePi+ board together with 12 carefully selective Grove sensors with 10 pieces cables , this starter kit gets you up and runnin

We integrated 10 full-color RGB LEDs on this stick, with only one signal pin you can control all 10 LEDs easily.

Makes it simple and easy to connect sensors and devices to any 96Boards-compatible base board

The camera can present dynamic thermal images and detect the surrounding temperature from -40℃~300℃.

This GT2 (2mm) Timing belt is made of Neoprene and has Fiberglass Cords for strength. It's great for your automation projects.

ShieldBuddyTC275 is fitted with the Infineon TC275 32-bit multicore processor on a board following the Arduino standard.

The i.MX 6 series unleashes the industry's first truly scalable multicore platform that includes single-, dual- and quad-core families ba...

Kit that includes the i.MX8M+ SoM and a dual-camera adapter.

Works like a Wireless push notification transmitters

A very flexible form factor, with a variety of physical sizes

Long Range IoT Industrial wireless vibration and temperature sensor

Perfect for anyone who loves tech, wants a new geeky challenge or build their own personal Internet of Things.

Sleek, compact, versatile, powerful. Immerse yourself in the power of the Intel® NUC.

This microcontroller board is perfect when you want something very compact, but still with a bunch of pins.

IWR1443 BoosterPack

JustBoom Player is a beautiful and highly-intuitive interface for playing your music from any source.

Ever built your own computer? With our kit and simple story book you’ll not only build your own powerful computer, you’ll bring it to life!

The Kinetis K2x MCU family is pin-peripheral and software-compatible with many of the Kinetis K series MCU families, offering full and hi...

Samsung ARTIK 520 product accelerator for advanced IoT devices. Super integrated, industrialized, certified and easy to program platform.

The LDS02 is a LoRaWAN Door and Window Sensor. It detects door open/close status and uplinks to IoT server via LoRaWAN network. It can be us

Add smart light and audio to the SensorTag

A wearable dev board that adds mobile application functionality to your e-textile projects via Bluetooth LE.

The MCP9700 is a small thermistor type temperature sensor

The LilyTiny is a tiny little LilyPad board designed to add flashy functionality to your project without taking up a lot of room. Even th...

±6g/±12g/±24g Dynamically Selectable Full-Scale 16-Bit Data Output 6D Orientation Detection Embedded Self-Test

Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series.

Battery Bottom

Custom made OpenBuilds Tee Nuts. They were designed to slide into slots with less hassle than the standard rectangular tee nuts.

It's a HAT for Raspberry Pi Zero Series with LED indicators for GPIO, Programmable Push buttons, active buzzer and USB to Serial interface.

Maker Tape's nylon fibers combined with conductive materials result in an amazingly strong and highly conductive tape that won't leave a mes

An Arduino UNO compatible board with built-in buzzer & 12x LEDs for students to learn coding and microcontroller. (Using CH340 USB-Serial)