Hardware and Software products

Introducing the first MODULAR COBOT

60V Synchronous Buck Converter with Internal FETs Enables High Efficiency

Digital Temperature Sensor in TO-92 Package Ideal for Measuring Ambient Temperature

The mcDemo205 is the world’s most powerful IoT module. It combines SIGFOX™, GNSS, and the new mc-Air™ Low Power LAN protocol into one device

Converts DTMF (Touch Tone) signals into digital.

Everything you need in one convenient kit!

I/O Carrier Card speeds prototype and evaluation of MicroZed and provides an excellent starting point to create your own MicroZed carrier.

M5Stick is a mini esp32 development board including 1.3’ OLED Screen(64x128), led, button, buzzer, IR Transmitter, 80mAh-Battery and MPU9250

Really cool mini heated build plate for your mini 3D printer builds – and so much more...

SPDT Mini Relay 6VDC / 60mA / 100 OHM Coil 10A / 120V Contact Rating

WEIGHT is a metering unit that integrates an ADC chip dedicated to the scale design.

Want to connect several motors and sensors to your mechatronic project?

Replacement smartphone/tablet holder for the the 3DR Solo controller.

Moduino is an industrial computer powered by Espressif’s ESP32 module equipped with ultra-low power Dual-Core Tensilica LX6 processor

The Modular Joints natively speak ROS 2.0 and interoperate seamlessly with other ROS 2.0 based robot parts, regardless of their original man

The Base securely holds four Modulos and connects them together. This version also has a socket for a Particle Photon/Electron.

A mountable yet movable plate for your Nema 14 & NEMA 17 Stepper Motors. It can be used with both V-Slot and OpenRail.

The next generation of smart glasses.

Mp3 Player Module for Arduino, Raspberry Pi, ESP32, ESP8266

The MR24BSD1 24GHz radar module applies Dopplor detected theory to implement human sleep quality monitoring providing a fully total private

MyOctopus HDC1000 Humidity/Temperature Sensor I2C: 0x40 0x41 0x42 0x43 - 3 V to 5 V - 14 Bit- Accuracy: Hum ±3% Temp ±0.2%

desktop 4DOF robot arm

The myProto accessory board for the NI myDAQ & NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections.

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface

The Nexys 4 board is a complete, ready-to-use digital circuit development platform based on the latest Artix-7 FPGA.

Edge-first computing for the IoT, DiY home automation, robotics and more!

Open source multi-frequency, multi-signal, low-cost, efficient, front-end GNSS receiver board built around the NT1065 chip.

The world's first supercomputer on a module, Jetson TX1 has the performance & power efficiency for the latest visual computing applications.

OpenSensors is a real-time data exchange building data infrastructure for the Internet of Things.

Give your vehicle a serious boost with the latest in rocket science. Just keep it away from Doctor Lizardo.

the perfect opportunity to build and have your very first walking Bluetooth control robot NO SOLDERING REQUIRED!

The PaPiRus HAT Case is designed specifically to fit the PaPiRus ePaper / eInk HAT module for the Raspberry Pi.

PaPiRus is an ePaper / eInk screen HAT module for the Raspberry Pi with screens ranging from 1.44″ to 2.7″ in size.

An 8-Channel power FET driver

The world's first open-source edge device w/ cellular/blockchain connectivity that collects physical world data in an end-to-end trusted way

9 pin D-sub male interface for RS232

PHPoC Shield 2 is the next generation of PHPoC Shield. It is equipped with both wired and wireless LAN and support various expansion board

The PIC24FJ256GA7 Curiosity Development Board (Part Number: DM240016) is a low-cost platform with an integrated programmer and debugger a...

Microchip's 32-bit portfolio with the MIPS (microAptiv™, M4K®, and M-class) and ARM®(Cortex® M0+, M4, M7) cores offer high performance mi...

The Black HAT Hacker in bijou form. It's Pico HAT Hacker!

Start your Android Things Project today with the PICO-PI-IMX7 based around the NXP i.MX7.Included in the pack is a USB Type-C cable for p...

Start your Android Things Project today with the PICO-PI-IMX7 based around the NXP i.MX7 including Camera Module, 5 Inch display and all ...

Pi Cubes Communication Thermostat provides professional look solution for your room.

Pi Cubes DO4 Module is providing four digital relay outputs.

Pi Cubes UI4 Module is providing four universal inputs.

The PIR Shield Evaluation Board uses a mixed-signal CMOS device to create a functional passive infrared sensor evaluation board.

PM2.5 is a pollution sensor base with affordable price and high performance. Integrated with PMSA003 and SHT20, makes it possible to measure

The Pmod ACL is a 3-axis digital accelerometer module that provides input to a system board.

The Pmod BTN gives users four momentary pushbuttons for easy user inputs to a system board.

The Pmod CLP is a 16x2 character LCD module that uses a Samsung KS0066 LCD controller.

The Pmod DA1 is an 8-bit digital-to-analog converter powered by two Analog Devices AD7303.

The Pmod DHB1 uses the Texas Instruments DRV8833 dual H-Bridge motor driver chip to drive two DC motors or a single stepper motor.

The Pmod LS1 allows users to receive signals from multiple optical sensors, such as the popular combination of an IR LED with an IR sensor.

The Pmod LVLSHFT is a digital logic level shifter.

The Pmod PS/2 is a module that allows users to interface PS/2 style mice or keyboards with their system.

The Pmod SWT provides users with four slides switches for up to 16 different binary logic inputs to for the attached system board.

The Pmod TMP2 is an ambient temperature sensor powered by the Analog Devices ADT7420.

The Pmod USBUART provides a USB to UART cross-conversion through the FTDI FT232RQ.

A single Arduino compatible pozyx tag. Localization is not possible without the anchors.

Programmable-Air is a hardware toolkit that allows you to inflate and deflate objects.