Hardware and Software products

This shield with PoE module allows an Arduino board to connect to the internet.

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz b...

Make connections, not silos. Connect all your devices and services, even those that haven’t been invented yet.

Cloud IoT Core is a fully managed service that allows you to easily and securely connect and manage millions of devices.

The one and only Apple phone.

This is the OpenBuilds custom NEMA 17 Stepper. This little motor packs a powerful punch at 76 oz of torque! Extra Long Wires!!

Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated volt...

The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the s...

This is an Arduino Temperature Sensor based on LM35 temperature chip. A Temperature Sensor can be used to detect ambient air temperature.

Intuitive and Powerful Ground Control Station for PX4 and ArduPilot UAVs

Gives users the ability to create all-in-one, integrated projects such as tablets, infotainment systems and embedded projects.

This Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration.

PIR is a unit with integrated body sensing module. It’s used to sense human activity

A bare PCB that is the exact size as our mini modular breadboards with the same connections to pins.

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Func...

balenaCloud is a modern development and deployment workflow for the Internet of Things.

BeagleBoard-xM delivers extra MIPS with 1-GHz ARM® Cortex™-A8 performance and extra memory with 512MB of low-power DDR RAM

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button c...

TensorFlow Lite is a set of tools to help developers run TensorFlow models on mobile, embedded, and IoT devices.

Make anything with EAGLE PCB design software. Professional power for every electronics designer.

Get started with the GNAT development environment.

AWS Identity and Access Management (IAM) enables you to securely control access to AWS services and resources for your users.

EARTH is a moisture detective unit for measuring the moisture in soil. The soil moisture sensor is pretty straight forward to use.

Facilitates the optimization and deployment of Deep Learning models using popular frameworks for GenAI, LLMs, Computer Vision, and more...

The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.

Cloud Platform for the Internet of Things

The product includes an on-board voltage regulator which gives it an operating voltage range of 3.3 ~ 5.5V.

MPLAB X is Microchip’s full-featured IDE software package. Now supporting both PIC and AVR product lines.

AWS IoT EduKit makes it easy for developers to receive hands-on experience building end-to-end IoT applications.

Notecarriers are companion development boards designed to make it easy to prototype and deploy IoT solutions with the Notecard.

A collection of easy-to-use software and tools enabling rapid development of Infineon MCUs

DC POWER JACK 2.1MM BARREL-TYPE PCB MOUNT

Create Smart IoT Sensor Devices Rapidly. Reduce Data Science Complexity.

Make your projects rock solid with the Prototyping Shield. It allows you to design custom circuits for products with the UNO footprint.

RGB is a sensor including three RGB LED lights and two GROVE ports.

Consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply or split supply

Flight Management Unit (FMU) running PX4, the largest commercially deployed open-source drone software stack for Drones and Rovers

Arduino base shield to connect to all grove sensors

Requires low-voltage and low current signals to control those switches

It is a wireless LAN programmable board embedded with a PHPoC interpreter. It supports various interfaces to connect with sensors

A Blocks to Javascript editor for the micro:bit

Add WiFI to your devices with the Arduino Uno WiFi. It's an Arduino Uno Rev3 with more kick: It comes with 4809 and IMU

We make your PCBs in the USA for $5 per square inch with free shipping worldwide.

The Hologram Global SIM Card allows you to connect you IoT device everywhere. Paired with a powerful device management platform and API.

A combination of both the Pulse Oximeter and Heart rate in one medical device

Add an ear to your project with this well-designed electret microphone amplifier.

Workshop4 is a comprehensive software IDE for Microsoft Windows that provides an integrated software development platform for all of the ...

A high-quality GPS module that can track up to 22 satellites, with a high-sensitivity receiver, built-in antenna, and lots of goodies!

This kit enables users of the Texas Instruments Launchpad to rapidly prototype and hack together fun microcontroller-based projects.

Complete Wearable and IoT Solution

The nRF5340 DK has a dual-core Bluetooth 5.2 SoC supporting Bluetooth Low Energy, Bluetooth mesh, NFC, Thread and Zigbee

Place PCB/PCBA order here: seeedstudio.com/fusion_pcb.html

With this plug-and-play toolkit, anyone can add AI to their edge devices and unlock the potential of AIoT.

Create Echo-connected accessories that respond to customer interactions with Alexa.

CircuitMaker is a free PCB design tool with zero limits that removes traditional barriers in the PCB design process.

This I2C digital humidity sensor is an accurate and intelligent alternative to the much simpler SHT15 Breakout.

The LightBlue Bean is a Bluetooth Arduino microcontroller. It's tiny and runs off a coin cell battery. Perfect for your next project.

This small, robust and powerful board has the same classic Nano footprint loved worldwide for just under $10.

The new soil moisture sensor uses Immersion Gold which protects the nickel from oxidation.