Hardware and Software products

Fusion for ARM development board integrates first-ever embedded debugger/programmer over WiFi. Enjoy cable-free world!

World's first debugger over wifi for development boards for KINETIS microcontrollers.

World's first debugger over wifi for development boards for STM32 microcontrollers.

World's first debugger over wifi for development boards for TIVA microcontrollers.

Integrated with GigaDevice's MCU, Flash, PMU and Sensor products, this EVAL board delivers tailored solutions to a foray of applications.

2.4", 240x320 pixels, Internet of Displays (IoD) Display Module

2.4", 240x320 pixels, Internet of Displays (IoD) Display Module

2.8", 240x320 pixels, Internet of Displays (IoD) Display Module

3.2", 240x320 pixels, Internet of Displays (IoD) Display Module

gen4 2.8" Diablo16 Intelligent Display Module, non Touch, without Cover Lens Bezel

gen4 2.4" Diablo16 Intelligent Display Module,non Touch, without Cover Lens Bezel

gen4 2.4" Diablo16 Intelligent Display Module, non Touch, Cover Lens Bezel

gen4 2.4" Picaso Intelligent Display Module

gen4 2.8" Diablo16 Intelligent Display Module, (non Touch, Cover Lens Bezel)

gen4 2.8" Picaso Intelligent Display Module

gen4 3.2" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 3.2" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 3.2" Diablo16 Intelligent Display Module, Capacitive Touch, with Cover Lens Bezel

gen4 3.5" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 3.5" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 3.5" Diablo16 Intelligent Display Module Capacitive Touch, with Cover Lens Bezel

gen4 4.3" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 4.3" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 5.0" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

gen4 5.0" Diablo16 Intelligent Display Module non Touch, Cover Lens Bezel

gen4 7.0" Diablo16 Intelligent Display Module non Touch, without Cover Lens Bezel

The Gert VGA 666 (6 bits per colour channel, hence 666) is a breakout/add on board for the Raspberry Pi Model B+, 2B and 3B.

Enables the design of cellular connected IoT edge devices that can operate in multiple countries

GoPlus is a enhanced M5 module. It features an all-in-one motor driver module, provides a combination of several M5 Modules and Units(SERVO,

The Grand Central is the first SAMD board that has enough pins to make it in the form of the Arduino Mega.

The Hall Angle Sensor is a miniature 360 degree sensor which works based on the principle of the Hall effect.

This is a 6 Dof IMU shield for Arduino, using the ADXL345 accelerometer and the ITG-3200 gyro.

This is an Arduino compatible alcohol sensor module from DFRobot with a 0-5ppm measuring range, supporting I2C and UART outputs.

This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino.

DFRobot Gravity: analog electrical conductivity sensor/meter(K=10) is particularly used to measure the high electrical conductivity liquid,

evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection and other fields.

This gray scale sensor is able to measure the intensity of light from black to white.

Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C.

Light sensors are probably one of the most common sensors in life, they can be found in your laptop, phone or home lighting system.

A rotary switch is a switch operated by rotation. It is often used when more than 2 positions are needed, such as multi-speed control.

The Gravity Conductivity Sensor Switch module can be used to detect if an object has electrical conductivity.

The H3LIS200DL is a high-performance triple-axis linear accelerometer with an ultra-low power consumption of 10uA.

The LIS331HH is a high-performance 3-axis linear accelerometer with an ultra-low power consumption of 10uA.

This device is based around a MEMS LIS2DH chip solution and has high-performance ultra-low power mode.

This time we reinvented the line-tracking sensor.

3-Axis acceleration sensor is an electronic equipment which could measure the acceleration during the object motion.

The Grove - 3-Axis Digital Accelerometer ±200g (ADXL372) is an ultra-low-power digital output MEMS Accelerometer.

The Grove - 3-Axis Digital Accelerometer ±40g (ADXL357) is a digital output MEMS Accelerometer.

The ADXL335 is a triple axis MEMS accelerometer with a low power consumption of 150 μA in the measurement mode! This analog accelerometer is

The Grove Base Kit for Raspberry Pi is one of the best kits for beginners to get started with Raspberry Pi.

Grove Breakout for LinkIt 7697 is a Grove port integrated and a feature expansion board for LinkIt 7697 development board.

The coulomb (symbol: C) is the International System of Units (SI) unit of electric charge.

What does "P" mean? "P" is for "panel mount" in this product

The Grove - Rivet Pack (30 PCS) is used for the mounting of the Grove module.

The Grove - Screw&Nut Pack (20 Sets) is used for the mounting of the Grove module.

Grove – Solid State Relay is a non-contact electronic switch module that has relay features.

The kit contains 9 selective Grove modules and the Smart 7688 Duo breakout board to get you quickly started with LinkIt Smart 7688 Duo under

Grove starter kit for LinkIt 7697 is a complete hardware solution to help you explore the IoT space and create innovative projects.

This is a 13'' screen that can still be displayed after power off which is called as E-Paper(electronic paper) or E-Ink.

Quickly launch your new drone, robotics or IoT device!