Hardware and Software products

STSPIN32F0A advanced 3-phase BLDC driver with embedded STM32 MCU single shunt evaluation board

Stratify OS is an RTOS that allows you to run multi-threaded applications on microcontrollers which filesystems and hardware abstration.

An extremely compact industrial server based on Raspberry Pi Compute Module

A Raspberry Pi based professional server

A Raspberry Pi based professional server

Plug S4Pi on your Raspberry Pi and control the projects from your Smartphone in a few minutes.

Universal Digital Input (ADC081C021)

A tiny, solderable Quad-Cortex A-17 module with 4GB RAM, HDMI and a pre-installed, Linux-based, open source software - SudoOS.

Surilli Relay Shield is an add-on for Surilli development boards. It is equipped with two 10A relays for switching high load appliances.

VOC and Weather Sensor (BME680)

Weather Sensor (MPL3115A2)

Temperature Sensor (LM75)

Advanced Universal Analog Input (ADC081C021)

Universal Analog Input (ADC081C021)

Empowers you to quickly and easily measure, capture and analyse your world

The kit is designed to help manufacturers and developers easily build smart home device prototypes that offer an ideal voice user experience

Designed to help you quickly and easily create far-field audio front end systems for your voice-enabled products with Alexa.

Makes it possible to connect up to six BigClow tags

The jewel of Hardware Engineering. Ideal for automation simulation and prototyping

Shield Multiplatform and Multiprotocol

"These M3 Tee Nuts are great for when your Project requires M3 Screws!"

Real-time temperature monitoring.

Make it simple to add speech to any of your projects. It only takes 3 wires to connect it with an Arduino or a Raspberry.

A Click board™ equipped with the sensor IC, which can digitize temperature measurements

A programmable logic board that supports thingSoC, Mikrobus, and Grove modules, using the PSoC Creator IDE

This Hub allows you to connect thingSoC, Mikrobus, and/or Grove System I2C Modules all at the same time, with any processor!

The "Grovey One" is a flexible microprocessor board that supports thingSoC, Mikrobus, and Grove modules, programmable within the Arduino IDE

Grovey Teensy3x enables you to connect thingSoC, Mikrobus, and/or Grove Modules to the excellent Teensy platform from PJRC.

An open-source hardware project based on the PSoC4L (Programmable System on Chip) with integrated USB and Li-Po charger.

thingSoC USBUART2 is a dual-channel USB bridge, with high speed interfaces for the fastest uploads!

"The Thin Hex Nut is affordable and works great with the OpenBuilds Low Profile M5 Screws!"

These Three Arm Knobs can be used as hold down clamps for your CNC Machine and make for a quick, easy adjustment for part swap outs or posit

An Arm-based Single Board Computer (SBC), uses Arm big.LITTLE™ technology’s 64-bits processor

Arm-based Single Board Computer (SBC) with enhanced computing performance, low power consumption and rich interfaces for industrial use

ARM-based SBC with enhanced and better compatibility

ARM-based SBC with enhanced and better compatibility

RISC-V single-board computer (SBC) designed for industrial IoT developer community

The Tinusaur Starter 2 is the second edition of the beginners’ kit that will help you start with Atmel ATtiny85 microcontroller

A miniature 640x480px camera with built-in lens. Connects directly to Gumstix Overo COMs via 27-pin ribbon.

The TinyFPGA A2 board is a bare-bones FPGA board in a tiny form-factor.

Smaller than a stick of gum. Powerful Lattice ECP5 FPGA providing everything needed to drive a custom embedded system of your design.

The 16 Edge LED TinyShield allows some cool and easy LED indications using only five I/O signals

This TinyShield makes it incredibly easy to add audio support to your TinyDuino projects.

The Barometric Pressure TinyShield allows you to measure barometric pressure (and determine altitude) and temperature with your TinyDuino

This board lets you communicate wirelessly with your TinyDuino

The Circle Edge LED TinyShield uses only six I/O signals to create a wide variety of LED indications.

The Dual Motor TinyShield allows you to drive two independently controlled DC brushed motors from your TinyDuino

Hook your projects up to the internet with the WiFi TinyShield!

TLD5542-1 Battery charger, LED driver, voltage regulator shield for Arduino

Designed to evaluate relay driven DC Motor applications

Provides DVI display, 10/100baseT Ethernet, USB Host, USB OTG, USB console and Stereo Audio to any Gumstix Overo® COM

TRACE is A line of built-in 4 sets of infrared emitting LEDs and infrared sensitive phototransistors.

This Triple Axis Accelerometer with Bosch BMA220 is an ultra small triaxial, low-g acceleration sensor breakboard with SPI and I2C interface

TRS3122E BoosterPack

Try Viam is a free service that lets you remotely control a Viam Rover in our robotics lab for 15-minute sessions from wherever you are.

The TSYS02P is a single chip, temperature sensor. It provides factory calibrated data corresponding to the measured temperature. The data...

Thundercomm TurboX D845 Dev Kit is a high performance platform based on the top-tier Qualcomm Snapdragon 845 processor.

A USB to UART interface to be used with any base board compatible

The UCW Hive is an IoT hub allowing to control and manage IoT devices.

USB is a USB driver module which integrates MAX3421E(USB peripheral/host controller).