This final challenge task is for you to complete to test what you have learnt from the course.
Give your device the capability to choose the most profitable proposal request in Industry Marketplace.
A simple, reliable and energy efficient module to facilitate touchless operation.
Intensity of light changes based on surroundings and sends a message through Telegram when there is a maximum and minimum intensity.
This project tutorial will show you how to implement a Fiber Optic Cable fault detection system with machine learning, Blues & Qubitro.
A project that will send message and e-mail when the temperature crosses the threshold value and also do the prediction
How to make a Otto Diy Dancing Robot. This is the world's first Otto robot without 3D printer and Arduino.
Have you ever forgotten to water your plant which resulted in a tragic death? Now you won't worry with this new watering device!
The mobile workplace monitor uses the NXP Rapid IoT and its sensors to monitor if a workplace is hazardous or not.
Theremino is an open source system that easily connect computers with real world applications
I bricked my FRDM-K82F while working on a new FlexIO peripheral. Here's guidance to avoid it, and if you bricked, here is how to repair it.
This project is to design and develop bluetooth and android automated portable solar lamp for outside camp, trekking, etc.
Quick and dirty check of basic toolchain and setup, using a ready to go LCD example.
How to make a Arduino Smart Moving Robot. This robot is able to moving and obstacle detecting.
Rain Water Harvesting for food and beverage industry monitoring and control system
A automated door system that mandates a customer to sanitize and get their temperature checked before entering a premise
A PC-based automation solution.
A guide to automatically starting to stream video to QGroundControl when the NavQ connects to the internet.
🛰️ Small satellite that was build for local CanSat competition 🚀
This project to show how MKR 1400 GSM could be connected to Alibaba IoT Platform
The Polling Machine Project works by sending and receiving questions and answers (from the choices) in the form of strings.
Will guide you to interface the Seeed Wio E5 and Arduino Uno to The Things Network.
A newly launched, screen-equipped force-controlled gripper, and a demo of robotic accurately grasping by using it.
Based on sensor data open/close window via actuator and turn on/off fans. App via Blynk platform. Entirely solar powered.
