Magnetic Levitation, need I say more? Levitate some small magnets with a bigger electromagnet!
Arduino Project: How to make a Fidget Spinner RPM counter with Hall-effect sensor.
Did you know that a standard three-wire PC Fan can be used as a sensor?
This is the simplest example of repulsive magnetic levitation.
Creative approach to building electronic chessboard upon RFID technology, Hall effect sensors, and Arduino Mega.
Easy way to interface Hall Effect sensor to be used later for proximity sensing, speed measuring and switching
Use a ratiometric linear Hall effect sensor to build simple magnetic field strength meter.
All ESP32 cards have a built-in Hall Effect sensor. The Hall Effect sensor can detect changes in the magnetic field in its environment.
A simple burglar alarm built using an ATtiny45. You can attach it anywhere and will it will inform when someone tries to steal something.
This project focused on the calculation of machine efficiency along with various parameters visualized on IBM Watson IoT platform.
The ESP32 inside the M5Stack Core module has a built-in Hall effect sensor. But where exactly is this small piece located? Let's measure it.
10 Magnets and 2 Hall effect sensors form a angle encoder which is used to measure angles that are displayed on a OLED screen.
Observe the magnetic field integrity and polarity in the air with the 3144E Hall effect sensor. Also, adjust the RGB LED colours easily.
We are making a magnet detector using a hall effect sensor and Arduino UNO.
Expand your magnetic sensors arsenal with Infineons TLE4964-3M Hall Shield2Go and Arduino IDE!
You can have an AIoT security system up and running with minimal configuration, without the need to write any code.
Taking an Arduino Uno, one display, one Hall sensor and four magnets, i measured how many meters run my little hamster named "Ciambella."
We aim to develop a tool to monitor the progress of beer fermentation in real-time and non-invasively.
Playing chess with casual opponents, enjoying the game and playing safe, keeping the social distance in the post-Covid era
Easy to build example of a brushless DC motor. Switching of the electromagnet is governed by a hall effect sensor.
Hall effect sensor detects the proximity of magnetic field, and "pushes" the pendulum in the exact moment.
Check out how you can easily sense magnetic fields in 3D with Infineon's 3DSense Shields2Go
This project walks through the basics of controlling a BLDC motor using the AMD Kria™ KD240 Drives Starter kit with motor accessory pack.
