PGEZ Zero is a compact 16 channel GPIO Expander based on the PCA9671, offering up to 64 different I2C addresses.
Covering everything you need to set up a smooth and responsive media center using Raspberry Pi 5 – without overcomplicating things.
Want to create a smart visitor counter that tracks people entering and exiting a room? With just an Arduino board, and a pair of IR sensors.
Built an air quality monitor with XIAO C6, CO2/tVOC sensors, and Zigbee for HA. Designed a custom shell for it!
DIY Temperature and Humidity Meter with XIAO ESP32C6 and Zigbee Integration for HomeAssistant!!!
Learn how to remotely control a 12V linear actuator using a 433MHz RF module, Arduino Uno, and Visuino!
This project aims to design and implement a smart home automation system using IoT (Internet of Things).
The PowerPulse Inverter converts 12V DC to AC voltage using square wave pulses, offering modular design for easy troubleshooting and upgrade
In this tutorial, we’ll use the CrowPanel ESP32-S3 Advanced HMI Display to create a voice-interaction chatbot!
Build a smart detector with the mmwave LD2410C to turn on and off the lights based on presence in a room.
Using the XIAO ESP32C6, I connect an atmospheric pressure sensor via Zigbee, sending real-time data to Home Assistant for monitoring ☁️.
A thinner version of the previously created protable display project.
Raspberry Pi 5 is short on 3D graphics. Can Raspberry Pi 6 bring major improvements? Will there be an external graphics card option?
Using the XIAO ESP32C6 and a relay with Zigbee to control a single-color LED strip in HomeAssistant💡
A 10x10 LED matrix displays the current day of the month with a color transition from red to green as the days progress.
Made a small DIY Pong Game console from scratch.
Made a studio light that has warm, cool, and RGB LEDs all driven through a custom PICO driver circuit.
Built a device to perfectly 'Split the G' in Guinness using sensors & Arduino! 🍺🔧 Heading to Ireland to test it.
Transform your door security with an Arduino-based RFID lock system for seamless, keyless entry and enhanced protection.
Raspberry Pi PICO 2 Powered TEMP GUN based around the GY-906 Infrared Temp Module.
The GY-68 module, also known as the BMP180 module, is a popular sensor module used for measuring pressure, temperature, and altitude.
Precision monitoring of atmospheric conditions becomes a reality with the GY-65 module based on BMP085 sensor.
A WIFI PLUG Powered by XIAO ESP32 C3 DEV board and a CUSTOM AC RELAY DRIVER BOARD.
The article features the 6 DOF robot arm myCobot 320 to create an automated desktop trash-removal assistant.
