In this project, we design a wireless sensor hub using ESP32 and Arduino connected via NRF24L01 transceivers.
A series of realtime video tutorials showing how to get OmnIoT SoftHub sensor data to/from a Thingsboard dashboard, no programming required!
With MKR1000 and Azure IoT Hub, STM32F4 Discovery Board is used to send acceleration and other random telemetry data to Azure IoT Hub.
Get your sensor data to almost any cloud based platform that provides an MQTT interface. With no programming required!
3D model of a housing to hold an Arduino Uno, which has room for expansion, and is aesthetically pleasing.
This project is about a high current USB 2.0 hub that is specifically designed to drive USB powered development boards and peripherals.
Allow users to build complex logic in a hub/gateway device without doing any programming. Includes support for the NXP IoT multi-sensor.
A series of real-time video tutorials showing how to get OmnIoT SoftHub sensor data to/from an Ubidots dashboard, no programming required!
Easily actuate devices based on complex sensor threshold logic and/or remote messaging from an MQTT dashboard, with no programming required.
The OmnIoT SoftHub is a low/no cost "no-programing-required" IoT edge platform. Implement your IoT edge applications in hours, not months.
The SoftHub has recently been updated with improved BLE beacon support. We show an example scenario incorporating multiple EnOcean sensors.
IoT system where a RIOT app publishes random messages to TTN using LoRaWAN protocol. A gateway will send them to the IoT Hub.
A small hub which is designed to pack inside any laptop, where space is very less and extra USB port is required.
