RGB LED control by WebSocketsServer | NodeMcu beginner

Hello
Today i show you how to control RGB LED using WebSocketsServer .In this project you have to need
 Hardware
1. Nodemcu
2. RGB LED
3. USB Connector
4. breadboard
Softtware
1.Ardunio
First you have to need Learn NodeMCU RGB LED | For beginners   Now  you have to need Download WebSocketsServe Library Click Here Then Included This Library

 Now Go to Example Flowing Image instruction

Now you have to need some edited
Remove This Code from Main Program
//WiFiMulti.addAP("rowsoni", "007892057");                                    //while(WiFiMulti.run() != WL_CONNECTED) {        // delay(100);    // }  And Add this code in main program                                     WiFi.softAP("hassan", "007892057");                                       IPAddress myIP = WiFi.softAPIP();                                       USE_SERIAL.print("AP IP address: ");                                       USE_SERIAL.println(myIP); After complete Editing Up lode program     Now connected your led Flowing Circuit