This is a tutorial regarding the process of usage of the Raspberry Pi to control SB-Servo motor. This process needs the components that are already mentioned in the above section. One should perform the following steps as the same flow to perform the task.
1. First, connect the SB-Servo Shield on top of Raspberry Pi GPIO header or General Purpose Input Output header. There are embedded white ports of servo shield to connect with servo motors.
2. Connect an external power supply (DC supply) to provide the power to the servo shield and then turn on the slider switch to start Raspberry pi. The ideal output power supply should be between 6 to 8.5 V.
If one wants to control the servo motor with PYTHON programming they can visit our GITHUB repository
You can also follow the below tutorial video for step by step instruction.
Comments