Bolt Iot-Automated School Bell

We are done with old electronic school bell!! This time to move in advanced technology through Bolt Iot we can able to give a good direction to school which can acquire new technology School Bells.

Using Bolt Iot module, Buzzer and other component using of Integromat we can able to build this device

Connection:-

• Connect Buzzer with Breadboard
• Buzzer (-ve) Pin- Shorter one connect with "GND"
• Buzzer (+ve) Pin- Longer one connect with "Pin1"
• Power on the Bolt device using power supply.

KeyPoints:-

• Link your Bolt device to the Bolt cloud.
• Create a free account on Integromat.
• Write correct "API KEY" number.

Follow the Steps:-

• Log in to Integromat.

• Now select "Bolt Iot" from the given option

• Select Bolt Iot 'Execute Command' Where click on Add option and Enter your API key, You can find your API key on your Bolt Cloud dashboard.

• Enter on Command and Write down the following command mention below:-

Command- Write digital Output

Device Name- BOLT13xxxxxx

PIN-1

State- HIGH

• Next, we want the buzzer to ring for a few 10 seconds at least. So we need to add a delay before switching off the Buzzer again.
• Click on the tools option and select sleep.

• Add delay in following term as 10 second because as in school there will be some parse of second where it will run and Stop. You make changes as your wish.

• Click on a new module and choose Bolt Iot. Now, in this module, we are going to switch off the Buzzer by sending a State-"LOW" opt to the Buzzer. And rest other option will remain same for third module.

• Click on the clock icon on the First Bolt module. It is the scheduling option. In run scenario Click on the regular Interval, Choose the Interval that you want to ring.

• Go to the Advanced Scheduling and give following interval of your own wish and select "Time from" to "Time to". Select Days and Month as per your wish. Click Add to submit the option.

• Click on the "save" Option to save scenario of the following.

• Now, we can say that our scenario has been successfully accomplished. And we are done with it. Given below is following scenario which will look in following way.

Note:-

• Before starting the function you must run scenario where you can able to avoid mistake on the following device.
• Always remember to Turn ON scheduling button otherwise function may not able to run.

Hope, so you have understood concept very well.