How to Use MotordriverL298N with skiiiD

Story

Before start, below URL link is a basic tutorial for how to use skiiiD

https://www.hackster.io/skiiid/getting-started-with-skiiid-editor-f69b5d

Video Instruction

Step 1. Launch skiiiD and select Arduino UNO

#1 Launch skiiiD and select New button

#2 Select ①Arduino Uno and then click ②OK button

*This is Tutorial, and we use Arduino UNO. Other boards(Mega, Nano) have the same process.

Step 2. Add Component

#1 Click '+' (Add Component Button) to search and select the component.

#2 ① Type 'motor' on the search bar or find the MotordriverL298N on the list.

#3②Select MotordriverL298N.

#4 then you can see ③ pin indication. (You can configure it.)

*This module has 8 pins to connect

skiiiD Editor automatically indicate pin setting *configuration available

[Default Pin Indication for MotordriverL298N Module] in case of Arduino UNO

5V: 5V

GND: GND

ENA: 3

IN1: 0

IN2: 1

IN3: 2

IN4: 4

ENB: 5

#5 After configuring pins ④ click ADD button on the right below side

#6⑤Added Modulehas appeared on the right panel

skiiiD Code of MotordriverL298N

skiiiD Code is intuitive function-based codes. This is based on skiiiD libraries

RotateA()
"Change speed and direction of motor connected with OUT1 and OUT2 pin.
Speed default: 100, Range: 0~100
Enter 1 on direction to change direction of the motor, default is 0."
RotateB()
"Change speed and direction of motor connected with OUT3 and OUT4 pin.
Speed default: 100, Range: 0~100
Enter 1 on direction to change direction of the motor, default is 0."
RotateAB()
"Change speed and direction of two motors simultaneously.
Speed default: 100, Range: 0~100
Enter 1 on direction to change direction of the motor, default is 0."

Contact and Feedback

We are working on components and boards libraries. Feel free to use it and feedback us, please. Below is contact methods

email: contact@skiiid.io

twitter: https://twitter.com/skiiiD_official

Youtube:https://www.youtube.com/channel/UCfS2RQL3m3hVoHkFo4R0AnQ

Comments are fine too!