How to Use PowerLed3W with skiiiD

Before start, below URL link is a basic tutorial for how to use skiiiD

https://www.hackster.io/skiiid/getting-started-with-skiiid-editor-f69b5d

Video Instruction

Step 1. Launch skiiiD and select Arduino UNO

#1 Launch skiiiD and select New button

#2 Select ①Arduino Uno and then click ②OK button

*This is Tutorial, and we use Arduino UNO. Other boards(Mega, Nano) have the same process.

Step 2. Add Component

#1 Click '+' (Add Component Button) to search and select the component.

#2 ① Type 'RGBLed' on the search bar or find the Button Module on the list.

#3②Select RGBLed.

#4 then you can see ③ pin indication. (You can configure it.)

*This module has 3 pins to connect

skiiiD Editor automatically indicate pin setting *configuration available

[Default Pin Indication for PowerLed Module] in case of Arduino UNO

S: 3

+: 5V

GND: GND

#5 After configuring pins ④ click ADD button on the right below side

#6⑤Added Modulehas appearedon the rightpanel

skiiiD Code of Passive PowerLed3W

skiiiD Code is intuitive function-based codes. This is based on skiiiD libraries.

on()
"Turn on the LED."
off()
"Turn off the LED."
toggle()
"Toggle. Switch turn on states to off or vice versa. \nBrightness will be applied when the LED turn on.(Brightness Range: 0 ~ 255)"
blink()
"Blink LED.\nVariable interval : Time interval between blink LED, default : 1,000ms\nVariable brightness : Change brighness of LED, default : 100(Brightness range: 0 ~ 255)."
fadeIn()
"Gradual increase the intensity of LED light during the time interval.\nVariable interval : Time interval until LED increasing the intensity to maximum, default : 1,000ms.\nVariable brightness : Change brighness of LED, default : 100."
fadeOut()
"Gradual decrease the intensity of LED light during the time interval.\nVariable interval : Time interval until LED increasing the intensity to minimum, default : 1,000ms.\nVariable brightness : Change brighness of LED, default : 100."

Contact and Feedback

We are working on components and boards libraries. Feel free to use it and feedback us, please. Below is contact methods

email: contact@skiiid.io

twitter: https://twitter.com/skiiiD_official

Youtube:https://www.youtube.com/channel/UCfS2RQL3m3hVoHkFo4R0AnQ

Comments are fine too!