Published March 3, 2020 © MIT

eeprog

An ATmega328-powered programmer for 28C64 EEPROM.

IntermediateShowcase (no instructions)728

Things used in this project

Hardware components

PCB

Shield, fits Arduino Uno R3

74HC595

8-bit shift register with output latches

DIL-16 IC socket

For the 74HC595

DIL-28 ZIF socket

For the 28C64 EEPROM. Mounting the ZIF in another DIL-28 socket is recommended.

Header pins

For mounting the shield to the Arduino Uno; I recommend soldering headers for all pins (even unused ones)

Arduino Uno R3

Controller for the programmer

Story

An open source hardware and software 28C64 EEPROM programmer, using the ATmega328 microcontroller. The goal of this project is to design and build an easy to use, single board programmer for 28C64 EEPROMs that could just be plugged in to a computer using a regular USB cable.

Code

Credits

Tobias Eriksson

1 project • 0 followers

Software engineer by day, electronics wizard wannabe at night

Contact

Comments

Please log in or sign up to comment.

eeprog

Things used in this project

Hardware components

Story

Schematics

Revision C

Code

Github

Credits

Tobias Eriksson

Comments

Embed the widget on your own site

eeprog

eeprog

Things used in this project

Hardware components

Story

Schematics

Revision C

Code

Github

Credits

Tobias Eriksson

Comments

Related channels and tags