Home Automation

/*
 * General options
 */

#define BOARD_HARDWARE_VERSION        "1.0.0"

/*
 * Board configuration (see examples below).
 */

#if defined(USE_WROVER_BOARD)

  // Custom board configuration
  #define BOARD_BUTTON_PIN            15                    // Pin where user button is attached
  #define BOARD_BUTTON_ACTIVE_LOW     true                  // true if button is "active-low"

  #define BOARD_LED_PIN_R             0                     // Set R,G,B pins - if your LED is PWM RGB 
  #define BOARD_LED_PIN_G             2
  #define BOARD_LED_PIN_B             4
  #define BOARD_LED_INVERSE           false                 // true if LED is common anode, false if common cathode
  #define BOARD_LED_BRIGHTNESS        128                   // 0..255 brightness control

#else

  // Custom board configuration
  #define BOARD_BUTTON_PIN            0                     // Pin where user button is attached
  #define BOARD_BUTTON_ACTIVE_LOW     true                  // true if button is "active-low"

  #define BOARD_LED_PIN               20                     // Set LED pin - if you have a single-color LED attached
  //#define BOARD_LED_PIN_R           27                    // Set R,G,B pins - if your LED is PWM RGB 
  //#define BOARD_LED_PIN_G           26
  //#define BOARD_LED_PIN_B           25
  //#define BOARD_LED_PIN_WS2812      33                    // Set if your LED is WS2812 RGB
  #define BOARD_LED_INVERSE           false                 // true if LED is common anode, false if common cathode
  #define BOARD_LED_BRIGHTNESS        64                    // 0..255 brightness control

#endif


/*
 * Advanced options
 */

#define BUTTON_HOLD_TIME_INDICATION   3000
#define BUTTON_HOLD_TIME_ACTION       10000

#define BOARD_PWM_MAX                 1023

#define LEDC_CHANNEL_1     1
#define LEDC_CHANNEL_2     2
#define LEDC_CHANNEL_3     3
#define LEDC_TIMER_BITS    10
#define LEDC_BASE_FREQ     12000

#define CONFIG_AP_URL                 "blynk.setup"
#define CONFIG_DEFAULT_SERVER         "blynk.cloud"
#define CONFIG_DEFAULT_PORT           443

#define WIFI_NET_CONNECT_TIMEOUT      30000
#define WIFI_CLOUD_CONNECT_TIMEOUT    30000
#define WIFI_AP_CONFIG_PORT           80
#define WIFI_AP_IP                    IPAddress(192, 168, 4, 1)
#define WIFI_AP_Subnet                IPAddress(255, 255, 255, 0)
//#define WIFI_CAPTIVE_PORTAL_ENABLE

#define USE_TICKER
//#define USE_TIMER_ONE
//#define USE_TIMER_THREE

#define BLYNK_NO_DEFAULT_BANNER

#if defined(APP_DEBUG)
  #define DEBUG_PRINT(...) BLYNK_LOG1(__VA_ARGS__)
#else
  #define DEBUG_PRINT(...)
#endif

/*
 * General options
 */

#define BOARD_HARDWARE_VERSION        "1.0.0"

/*
 * Board configuration (see examples below).
 */

#if defined(USE_WROVER_BOARD)

  // Custom board configuration
  #define BOARD_BUTTON_PIN            15                    // Pin where user button is attached
  #define BOARD_BUTTON_ACTIVE_LOW     true                  // true if button is "active-low"

  #define BOARD_LED_PIN_R             0                     // Set R,G,B pins - if your LED is PWM RGB 
  #define BOARD_LED_PIN_G             2
  #define BOARD_LED_PIN_B             4
  #define BOARD_LED_INVERSE           false                 // true if LED is common anode, false if common cathode
  #define BOARD_LED_BRIGHTNESS        128                   // 0..255 brightness control

#else

  // Custom board configuration
  #define BOARD_BUTTON_PIN            0                     // Pin where user button is attached
  #define BOARD_BUTTON_ACTIVE_LOW     true                  // true if button is "active-low"

  #define BOARD_LED_PIN               20                     // Set LED pin - if you have a single-color LED attached
  //#define BOARD_LED_PIN_R           27                    // Set R,G,B pins - if your LED is PWM RGB 
  //#define BOARD_LED_PIN_G           26
  //#define BOARD_LED_PIN_B           25
  //#define BOARD_LED_PIN_WS2812      33                    // Set if your LED is WS2812 RGB
  #define BOARD_LED_INVERSE           false                 // true if LED is common anode, false if common cathode
  #define BOARD_LED_BRIGHTNESS        64                    // 0..255 brightness control

#endif


/*
 * Advanced options
 */

#define BUTTON_HOLD_TIME_INDICATION   3000
#define BUTTON_HOLD_TIME_ACTION       10000

#define BOARD_PWM_MAX                 1023

#define LEDC_CHANNEL_1     1
#define LEDC_CHANNEL_2     2
#define LEDC_CHANNEL_3     3
#define LEDC_TIMER_BITS    10
#define LEDC_BASE_FREQ     12000

#define CONFIG_AP_URL                 "blynk.setup"
#define CONFIG_DEFAULT_SERVER         "blynk.cloud"
#define CONFIG_DEFAULT_PORT           443

#define WIFI_NET_CONNECT_TIMEOUT      30000
#define WIFI_CLOUD_CONNECT_TIMEOUT    30000
#define WIFI_AP_CONFIG_PORT           80
#define WIFI_AP_IP                    IPAddress(192, 168, 4, 1)
#define WIFI_AP_Subnet                IPAddress(255, 255, 255, 0)
//#define WIFI_CAPTIVE_PORTAL_ENABLE

#define USE_TICKER
//#define USE_TIMER_ONE
//#define USE_TIMER_THREE

#define BLYNK_NO_DEFAULT_BANNER

#if defined(APP_DEBUG)
  #define DEBUG_PRINT(...) BLYNK_LOG1(__VA_ARGS__)
#else
  #define DEBUG_PRINT(...)
#endif