This project was born from the need to experiment and use different types of coils. I was getting one by one the materials, some of them recycled, and drawing and 3D printing the necessary pieces to later assemble them in a Mini Winding Machine. The advantage of this DIY project is that I can manufacture coils of different diameter, height, width, number of turns, yarn thickness, etc., without having to buy them and being able to make them to measure, according to the needs of each future project. (DeepL translator)
--------------------------------------------------] [-----------------------------------------------------------
Some of the components used
Close up of motor, switch, 3D printed parts, battery, screws, etc.
Close-Up Mini Winding Machine
Caja y conectores impresos en 3D para batería de celular reciclada.
https://cults3d.com/es/modelo-3d/herramientas/caja-con-conectores-para-bateria-reciclada-de-celular-perezbongiovanni
Soporte para motor e interruptor y soporte de eje.
https://cults3d.com/es/modelo-3d/herramientas/soporte-para-motor-dc-con-caja-reductora-soporte-de-eje-e-interruptor-dip-perezbongiovanni
![Mini Winding Machine [coil maker]](https://prod.hackster-cdn.online/assets/transparent-a0c1e3063bcabc548a5f3fa7328f3c1c97f747e6e764da4c14439567baa79ae1.gif)
![Mini Winding Machine [coil maker]](https://hackster.imgix.net/uploads/attachments/1719314/_AoXBXorfwh.blob?auto=compress%2Cformat&w=900&h=675&fit=min)
Comments