![LogicTronix [FPGA Design + Machine Learning Company]](https://hackster.imgix.net/uploads/attachments/1123066/_SyVIfEqFUU.blob?auto=compress%2Cformat&w=40&h=40&fit=min&dpr=2)
Hardware components | ||||||
 |
| × | 1 | |||
Software apps and online services | ||||||
 |
| |||||
This tutorial is on creating Petalinux 2023.1 BSP project for Kria KV260, building it and configuring it for generating the WIC Image file.
Requirements:
- Petalinux 2023.1 : https://www.xilinx.com/member/forms/download/xef.html?filename=petalinux-v2023.1-05012318-installer.run. You can install Petalinux 2023.1 as like as previous version. You can install necessary packages or setup environment for petalinux before installing it from: Article-73296 or UG1414.
- KV260 starter kit BSP : https://www.xilinx.com/member/forms/download/xef.html?filename=xilinx-kv260-starterkit-v2023.1-05080224.bsp
Download Petalinux and KV260 starter kit BSP from Xilinx download page:
Petalinux BSP download Page- AMD-Xilinx
Run following command to create petalinux project from BSP with kv260-2023-1-defaultas project name:
petalinux-create -t project -s ./xilinx-kv260-starterkit-v2023.1-05080224.bsp -n kv260-p2023-1-defaultThis will create petalinux project folder kv260-p2023-1-defaultfolder.
Build the petalinux projectRun following command to build the petalinux project:
petalinux-buildThis will create neccessary boot and root filesystem at <petalinux-project path>/images/linux folder
Next we need to create the wic image and burn the wic image in SD card.
But, if we directly create WIC at this petalinux BSP project here then there will be issues while Booting.
So lets see what issue could came on default build and how to resolve that!Issue with the default build
The default build stucks at following console log while Booting:
[ OK ] Mounted /run/media/boot-mmcblk1p1.
[ TIME ] Timed out waiting for device /dev/mmcblk0p1.
[DEPEND] Dependency failed for /boot.
[DEPEND] Dependency failed for Local File Systems.
[ OK ] Stopped Dispatch Password …ts to Console Directory Watch.
[ OK ] Stopped Forward Password R…uests to Wall Directory Watch.
[ OK ] Reached target Timer Units.
[ OK ] Reached target Preparation for Network.
[ OK ] Reached target Login Prompts.
[ OK ] Closed Syslog Socket.
Starting Network Configuration...
[ OK ] Reached target Socket Units.
[ OK ] Started Emergency Shell.
[ OK ] Reached target Emergency Mode.
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished Record System Boot/Shutdown in UTMP.
Starting Record Runlevel Change in UTMP...
[ OK ] Finished Record Runlevel Change in UTMP.
[ OK ] Started Network Configuration.
Starting Wait for Network to be Configured...
[ OK ] Started Network Name Resolution.
[ OK ] Reached target Network.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Started NFS status monitor for NFSv2/3 locking..
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target System Time Set.
You are in emergency mode. After logging in, type "journalctl -xb" to view
system logs, "systemctl reboot" to reboot, "systemctl
Cannot open access to console, the root account is locked.
See sulogin(8) man page for more details.
Press Enter to continue.- Issue was due to the wic file creation using petalinux-packagecommand,which uses default <Petalinux Project Path>/build/rootfs.wks
Default wks adds following line in /etc/fstab
# stock fstab - you probably want to override this with a machine specific one
/dev/root / auto defaults 1 1
proc /proc proc defaults 0 0
devpts /dev/pts devpts mode=0620,ptmxmode=0666,gid=5 0 0
tmpfs /run tmpfs mode=0755,nodev,nosuid,strictatime 0 0
tmpfs /var/volatile tmpfs defaults 0 0
# uncomment this if your device has a SD/MMC/Transflash slot
#/dev/mmcblk0p1 /media/card auto defaults,sync,noauto 0 0
/dev/mmcblk0p1 /boot vfat defaults 0 0For this, connect the SD card with your host computer and update the etc/fstab file by removing last line in root partition:
/dev/mmcblk0p1 /boot vfat defaults 0 0
fstab inside /root/etc of SD Image
Here is the rootfs.wks with custom partition for boot and root
# Description: Creates a partitioned SD card image. Boot files
# are located in the first vfat partition. Rootfs will be in second ext4 partition.
part /boot --source bootimg-partition --ondisk mmcblk1 --fstype=vfat --label boot --active --align 4 --fixed-size 2G
part / --source rootfs --ondisk mmcblk1 --fstype=ext4 --label root --align 4 --fixed-size 4GWe need to use following command to create the wic image bypassing default *.wks with custom one:
petalinux-package --wic --wks ./rootfs.wks --bootfiles "ramdisk.cpio.gz.u-boot boot.scr Image system.dtb"Creating WIC with custom rootfs.wks
This will create wic with updated mount point for boot partition. Next burn the WIC to SD card with any software tools like Balenaetcher and boot the SD card.
This will successfully boot the image and asks for petalinux login.
Boot Success!
You can find KV260 boot.log file at the attachment.
Kudos to Sanam@LogicTronix for creating this Tutorial for Petalinux 2023.1 for Kria!
Xilinx Zynq MP First Stage Boot Loader
Release 2022.2 Apr 3 2023 - 09:10:43
MultiBootOffset: 0x40
Reset Mode : System Reset
Platform: Silicon (4.0), Running on A53-0 (64-bit) Processor, Device Name: XCZUUNKNEG
QSPI 32 bit Boot Mode
FlashID=0x20 0xBB 0x20
PMU Firmware 2022.2 Apr 3 2023 09:10:43
PMU_ROM Version: xpbr-v8.1.0-0
NOTICE: BL31: v2.6(release):xlnx_rebase_v2.6_2022.1_update3-18-g0897efd45
NOTICE: BL31: Built : 03:55:03, Sep 9 2022
U-Boot 2022.01 (Jan 25 2023 - 08:10:44 +0000)
CPU: ZynqMP
Silicon: v3
Detected name: zynqmp-sm-k26-xcl2gc-ed-revA-sck-kv-g-revB
Model: ZynqMP SM-K26 Rev1/B/A
Board: Xilinx ZynqMP
DRAM: 4 GiB
PMUFW: v1.1
Cannot load PMUFW configuration object (1)
PMUFW returned 0x00000001 status!
Xilinx I2C FRU format at nvmem0:
Manufacturer Name: XILINX
Product Name: SM-K26-XCL2GC-ED
Serial No: 50572B111F0J
Part Number: 5057-02ED
File ID: 0x0
Revision Number: A
Xilinx I2C FRU format at nvmem1:
Manufacturer Name: XILINX
Product Name: SCK-KV-G
Serial No: 50582B112M1J
Part Number: 5058-02
File ID: 0x0
Revision Number: B
EL Level: EL2
Chip ID: xck26
NAND: 0 MiB
MMC: mmc@ff160000: 0, mmc@ff170000: 1
Loading Environment from nowhere... OK
In: serial
Out: serial
Err: serial
Bootmode: QSPI_MODE
Reset reason: SOFT
Net: PHY reset timed out
ZYNQ GEM: ff0e0000, mdio bus ff0e0000, phyaddr 1, interface rgmii-id
eth0: ethernet@ff0e0000
gpio: pin gpio@ff0a000038 (gpio 38) value is 0
gpio: pin gpio@ff0a000038 (gpio 38) value is 1
starting USB...
Bus usb@fe200000: Register 2000440 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus usb@fe200000 for devices... 4 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot: 0
SM-K26-XCL2GC-ED: No match
switch to partitions #0, OK
mmc0(part 0) is current device
** No partition table - mmc 0 **
Couldn't find partition mmc 0:1
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
3017 bytes read in 13 ms (226.6 KiB/s)
## Executing script at 20000000
Trying to load boot images from mmc1
22606336 bytes read in 1474 ms (14.6 MiB/s)
43748 bytes read in 19 ms (2.2 MiB/s)
24875982 bytes read in 1627 ms (14.6 MiB/s)
## Loading init Ramdisk from Legacy Image at 04000000 ...
Image Name: petalinux-initramfs-image-xilinx
Created: 2011-04-05 23:00:00 UTC
Image Type: AArch64 Linux RAMDisk Image (uncompressed)
Data Size: 24875918 Bytes = 23.7 MiB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
## Flattened Device Tree blob at 00100000
Booting using the fdt blob at 0x100000
Loading Ramdisk to 77846000, end 78fff38e ... OK
Loading Device Tree to 000000000fff2000, end 000000000ffffae3 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 6.1.5-xilinx-v2023.1 (oe-user@oe-host) (aarch64-xilinx-linux-gcc (GCC) 12.2.0, GNU ld (GNU Binutils) 2.39.0.20220819) #1 SMP Fri Apr 21 07:47:58 UTC 2023
[ 0.000000] Machine model: ZynqMP KV260 revB
[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
[ 0.000000] printk: bootconsole [cdns0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000087fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fefffff]
[ 0.000000] node 0: [mem 0x0000000800000000-0x000000087fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000087fffffff]
[ 0.000000] On node 0, zone Normal: 256 pages in unavailable ranges
[ 0.000000] cma: Reserved 1000 MiB at 0x0000000039000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 18 pages/cpu s35816 r8192 d29720 u73728
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1031940
[ 0.000000] Kernel command line: earlycon console=ttyPS1,115200 clk_ignore_unused ext4=/dev/mmcblk1p2:/rootfs init_fatal_sh=1 cma=1000M uio_pdrv_genirq.of_id=generic-uio
[ 0.000000] Unknown kernel command line parameters "ext4=/dev/mmcblk1p2:/rootfs init_fatal_sh=1", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x000000007bf00000-0x000000007ff00000] (64MB)
[ 0.000000] Memory: 2975688K/4193280K available (14528K kernel code, 1020K rwdata, 4144K rodata, 2240K init, 376K bss, 193592K reserved, 1024000K cma-reserved)
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x1ffffffffffffff max_cycles: 0x171015c90f, max_idle_ns: 440795203080 ns
[ 0.000000] sched_clock: 57 bits at 100MHz, resolution 10ns, wraps every 4398046511101ns
[ 0.008358] Console: colour dummy device 80x25
[ 0.012484] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399996)
[ 0.022839] pid_max: default: 32768 minimum: 301
[ 0.027618] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.034787] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.043637] rcu: Hierarchical SRCU implementation.
[ 0.047322] rcu: Max phase no-delay instances is 1000.
[ 0.052781] EFI services will not be available.
[ 0.057169] smp: Bringing up secondary CPUs ...
[ 0.061896] Detected VIPT I-cache on CPU1
[ 0.061964] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.062370] Detected VIPT I-cache on CPU2
[ 0.062425] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.062805] Detected VIPT I-cache on CPU3
[ 0.062856] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.062899] smp: Brought up 1 node, 4 CPUs
[ 0.096969] SMP: Total of 4 processors activated.
[ 0.101641] CPU features: detected: 32-bit EL0 Support
[ 0.106744] CPU features: detected: CRC32 instructions
[ 0.111893] CPU: All CPU(s) started at EL2
[ 0.115915] alternatives: applying system-wide alternatives
[ 0.122512] devtmpfs: initialized
[ 0.130148] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.134436] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.163565] pinctrl core: initialized pinctrl subsystem
[ 0.164051] DMI not present or invalid.
[ 0.167355] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.173599] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.179940] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.187757] audit: initializing netlink subsys (disabled)
[ 0.193184] audit: type=2000 audit(0.132:1): state=initialized audit_enabled=0 res=1
[ 0.193550] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.207586] ASID allocator initialised with 65536 entries
[ 0.213004] Serial: AMBA PL011 UART driver
[ 0.234419] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.235558] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.242142] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.248890] HugeTLB: 508 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.255284] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.262030] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.268345] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.275091] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.349388] raid6: neonx8 gen() 2504 MB/s
[ 0.417438] raid6: neonx4 gen() 2468 MB/s
[ 0.485494] raid6: neonx2 gen() 2360 MB/s
[ 0.553546] raid6: neonx1 gen() 2010 MB/s
[ 0.621605] raid6: int64x8 gen() 1572 MB/s
[ 0.689662] raid6: int64x4 gen() 1740 MB/s
[ 0.757711] raid6: int64x2 gen() 1549 MB/s
[ 0.825779] raid6: int64x1 gen() 1148 MB/s
[ 0.825818] raid6: using algorithm neonx8 gen() 2504 MB/s
[ 0.897814] raid6: .... xor() 1838 MB/s, rmw enabled
[ 0.897858] raid6: using neon recovery algorithm
[ 0.902169] iommu: Default domain type: Translated
[ 0.906568] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.912986] SCSI subsystem initialized
[ 0.916665] usbcore: registered new interface driver usbfs
[ 0.921990] usbcore: registered new interface driver hub
[ 0.927258] usbcore: registered new device driver usb
[ 0.932339] mc: Linux media interface: v0.10
[ 0.936520] videodev: Linux video capture interface: v2.00
[ 0.941967] pps_core: LinuxPPS API ver. 1 registered
[ 0.946875] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.955965] PTP clock support registered
[ 0.959869] EDAC MC: Ver: 3.0.0
[ 0.963270] zynqmp-ipi-mbox mailbox@ff9905c0: Registered ZynqMP IPI mbox with TX/RX channels.
[ 0.971648] FPGA manager framework
[ 0.974905] Advanced Linux Sound Architecture Driver Initialized.
[ 0.981179] Bluetooth: Core ver 2.22
[ 0.984427] NET: Registered PF_BLUETOOTH protocol family
[ 0.989695] Bluetooth: HCI device and connection manager initialized
[ 0.996011] Bluetooth: HCI socket layer initialized
[ 1.000854] Bluetooth: L2CAP socket layer initialized
[ 1.005875] Bluetooth: SCO socket layer initialized
[ 1.011049] clocksource: Switched to clocksource arch_sys_counter
[ 1.016916] VFS: Disk quotas dquot_6.6.0
[ 1.020692] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.032129] NET: Registered PF_INET protocol family
[ 1.032481] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 1.042168] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 1.048197] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.055874] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.063925] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 1.071832] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.077651] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 1.084305] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 1.091471] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.097240] RPC: Registered named UNIX socket transport module.
[ 1.102842] RPC: Registered udp transport module.
[ 1.107512] RPC: Registered tcp transport module.
[ 1.112179] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.118585] PCI: CLS 0 bytes, default 64
[ 1.122705] Trying to unpack rootfs image as initramfs...
[ 1.129331] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[ 1.136578] Initialise system trusted keyrings
[ 1.140198] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.147531] NFS: Registering the id_resolver key type
[ 1.151393] Key type id_resolver registered
[ 1.155518] Key type id_legacy registered
[ 1.159535] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.166164] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.173833] jffs2: version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
[ 1.212833] NET: Registered PF_ALG protocol family
[ 1.212902] xor: measuring software checksum speed
[ 1.220284] 8regs : 2801 MB/sec
[ 1.224593] 32regs : 2802 MB/sec
[ 1.229174] arm64_neon : 2612 MB/sec
[ 1.229729] xor: using function: 32regs (2802 MB/sec)
[ 1.234759] Key type asymmetric registered
[ 1.238819] Asymmetric key parser 'x509' registered
[ 1.243734] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.251035] io scheduler mq-deadline registered
[ 1.255518] io scheduler kyber registered
[ 1.292197] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.293991] Serial: AMBA driver
[ 1.301292] brd: module loaded
[ 1.304535] loop: module loaded
[ 1.308214] tun: Universal TUN/TAP device driver, 1.6
[ 1.308368] CAN device driver interface
[ 1.312151] usbcore: registered new interface driver asix
[ 1.316850] usbcore: registered new interface driver ax88179_178a
[ 1.322892] usbcore: registered new interface driver cdc_ether
[ 1.328707] usbcore: registered new interface driver net1080
[ 1.334314] usbcore: registered new interface driver cdc_subset
[ 1.340197] usbcore: registered new interface driver zaurus
[ 1.345753] usbcore: registered new interface driver cdc_ncm
[ 1.351353] usbcore: registered new interface driver r8153_ecm
[ 1.357983] usbcore: registered new interface driver uas
[ 1.362445] usbcore: registered new interface driver usb-storage
[ 1.369249] rtc_zynqmp ffa60000.rtc: registered as rtc0
[ 1.373571] rtc_zynqmp ffa60000.rtc: setting system clock to 2023-08-02T06:36:56 UTC (1690958216)
[ 1.382503] i2c_dev: i2c /dev entries driver
[ 1.388382] usbcore: registered new interface driver uvcvideo
[ 1.393194] Bluetooth: HCI UART driver ver 2.3
[ 1.396745] Bluetooth: HCI UART protocol H4 registered
[ 1.401837] Bluetooth: HCI UART protocol BCSP registered
[ 1.407160] Bluetooth: HCI UART protocol LL registered
[ 1.412218] Bluetooth: HCI UART protocol ATH3K registered
[ 1.417612] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 1.423911] Bluetooth: HCI UART protocol Intel registered
[ 1.429189] Bluetooth: HCI UART protocol QCA registered
[ 1.434406] usbcore: registered new interface driver bcm203x
[ 1.440012] usbcore: registered new interface driver bpa10x
[ 1.445545] usbcore: registered new interface driver bfusb
[ 1.451021] usbcore: registered new interface driver btusb
[ 1.456501] usbcore: registered new interface driver ath3k
[ 1.462062] EDAC MC: ECC not enabled
[ 1.465640] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
[ 1.474334] cortex_edac edac: cortex l1/l2 driver is deprecated
[ 1.480548] EDAC DEVICE1: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[ 1.492983] sdhci: Secure Digital Host Controller Interface driver
[ 1.498463] sdhci: Copyright(c) Pierre Ossman
[ 1.502781] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.508945] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.514395] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.520904] zynqmp_firmware_probe Platform Management API v1.1
[ 1.526622] zynqmp_firmware_probe Trustzone version v1.0
[ 1.560924] securefw securefw: securefw probed
[ 1.561234] zynqmp-aes zynqmp-aes.0: will run requests pump with realtime priority
[ 1.567931] usbcore: registered new interface driver usbhid
[ 1.572911] usbhid: USB HID core driver
[ 1.579540] ARM CCI_400_r1 PMU driver probed
[ 1.580166] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
[ 1.587886] usbcore: registered new interface driver snd-usb-audio
[ 1.594353] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 1.603647] Initializing XFRM netlink socket
[ 1.605302] NET: Registered PF_INET6 protocol family
[ 1.610789] Segment Routing with IPv6
[ 1.613840] In-situ OAM (IOAM) with IPv6
[ 1.617793] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.624011] NET: Registered PF_PACKET protocol family
[ 1.628612] NET: Registered PF_KEY protocol family
[ 1.633379] can: controller area network core
[ 1.637710] NET: Registered PF_CAN protocol family
[ 1.642443] can: raw protocol
[ 1.645386] can: broadcast manager protocol
[ 1.649546] can: netlink gateway - max_hops=1
[ 1.654086] Bluetooth: RFCOMM TTY layer initialized
[ 1.658726] Bluetooth: RFCOMM socket layer initialized
[ 1.663822] Bluetooth: RFCOMM ver 1.11
[ 1.667535] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.672802] Bluetooth: BNEP filters: protocol multicast
[ 1.678006] Bluetooth: BNEP socket layer initialized
[ 1.682922] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.688815] Bluetooth: HIDP socket layer initialized
[ 1.693779] 8021q: 802.1Q VLAN Support v1.8
[ 1.698112] 9pnet: Installing 9P2000 support
[ 1.702153] Key type dns_resolver registered
[ 1.706580] registered taskstats version 1
[ 1.710434] Loading compiled-in X.509 certificates
[ 1.717278] Btrfs loaded, crc32c=crc32c-generic, zoned=no, fsverity=no
[ 1.721880] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa)
[ 1.728143] alg: shash: zynqmp-sha3-384 digest() failed on test vector 0; expected_error=0, actual_error=-22, cfg="digest aligned buffer"
[ 1.739524] alg: self-tests for sha3-384 using zynqmp-sha3-384 failed (rc=-22)
[ 1.739534] ------------[ cut here ]------------
[ 1.751257] alg: self-tests for sha3-384 using zynqmp-sha3-384 failed (rc=-22)
[ 1.751297] WARNING: CPU: 2 PID: 69 at crypto/testmgr.c:5835 alg_test+0x4a8/0x540
[ 1.765871] Modules linked in:
[ 1.768900] CPU: 2 PID: 69 Comm: cryptomgr_test Not tainted 6.1.5-xilinx-v2023.1 #1
[ 1.776510] Hardware name: ZynqMP KV260 revB (DT)
[ 1.781182] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1.788101] pc : alg_test+0x4a8/0x540
[ 1.791733] lr : alg_test+0x4a8/0x540
[ 1.795366] sp : ffff800009ee3d50
[ 1.798653] x29: ffff800009ee3d50 x28: 00000000000000d9 x27: ffff8000095ccce0
[ 1.805747] x26: 0000000000000000 x25: ffff800008e87cf8 x24: 00000000000000d9
[ 1.812840] x23: ffff000801f73680 x22: ffff000801f73600 x21: 000000000001110e
[ 1.819933] x20: 00000000000000be x19: 00000000000000d8 x18: 00000000fffffffe
[ 1.827026] x17: 322d3d6372282064 x16: 656c696166203438 x15: ffff800009ee3980
[ 1.834119] x14: 0000000000000000 x13: ffff8000094b6010 x12: 00000000000002df
[ 1.841212] x11: 00000000000000f5 x10: ffff8000094e3708 x9 : ffff8000094b6010
[ 1.848305] x8 : 00000000fffff7ff x7 : ffff8000094e2010 x6 : 00000000000000f5
[ 1.855398] x5 : 0000000000005ff4 x4 : 40000000fffff8f5 x3 : 0000000000000000
[ 1.862491] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000803864400
[ 1.869585] Call trace:
[ 1.872007] alg_test+0x4a8/0x540
[ 1.875293] cryptomgr_test+0x2c/0x50
[ 1.878926] kthread+0xd8/0xdc
[ 1.881954] ret_from_fork+0x10/0x20
[ 1.885501] ---[ end trace 0000000000000000 ]---
[ 2.127694] Freeing initrd memory: 24292K
[ 2.134810] zynqmp-aes zynqmp-aes.0: ERROR: Unknown error
[ 2.134883] alg: aead: zynqmp-aes-gcm encryption failed on test vector 8; expected_error=0, actual_error=-64, cfg="in-place (one sglist)"
[ 2.146873] alg: self-tests for gcm(aes) using zynqmp-aes-gcm failed (rc=-64)
[ 2.146878] ------------[ cut here ]------------
[ 2.158536] alg: self-tests for gcm(aes) using zynqmp-aes-gcm failed (rc=-64)
[ 2.158570] WARNING: CPU: 1 PID: 71 at crypto/testmgr.c:5835 alg_test+0x4a8/0x540
[ 2.173064] Modules linked in:
[ 2.176094] CPU: 1 PID: 71 Comm: cryptomgr_test Tainted: G W 6.1.5-xilinx-v2023.1 #1
[ 2.185174] Hardware name: ZynqMP KV260 revB (DT)
[ 2.189846] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2.196765] pc : alg_test+0x4a8/0x540
[ 2.200398] lr : alg_test+0x4a8/0x540
[ 2.204031] sp : ffff800009ef3d50
[ 2.207318] x29: ffff800009ef3d50 x28: 00000000000000d9 x27: ffff8000095ccce0
[ 2.214411] x26: 0000000000000000 x25: ffff800008e87cf8 x24: 00000000000000d9
[ 2.221504] x23: ffff000801f73880 x22: ffff000801f73800 x21: 0000000000011183
[ 2.228597] x20: 0000000000000084 x19: 00000000000000d8 x18: 00000000fffffffe
[ 2.235690] x17: 34362d3d63722820 x16: 64656c696166206d x15: ffff800009ef3980
[ 2.242783] x14: 0000000000000000 x13: ffff8000094b6010 x12: 0000000000000339
[ 2.249877] x11: 0000000000000113 x10: ffff8000094e39d8 x9 : ffff8000094b6010
[ 2.256969] x8 : 00000000fffff7ff x7 : ffff8000094e2010 x6 : 0000000000000113
[ 2.264063] x5 : 0000000000005ff4 x4 : 40000000fffff913 x3 : 0000000000000000
[ 2.271156] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000803866440
[ 2.278249] Call trace:
[ 2.280672] alg_test+0x4a8/0x540
[ 2.283958] cryptomgr_test+0x2c/0x50
[ 2.287591] kthread+0xd8/0xdc
[ 2.290618] ret_from_fork+0x10/0x20
[ 2.294165] ---[ end trace 0000000000000000 ]---
[ 2.668080] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 24, base_baud = 6249999) is a xuartps
[ 2.677115] printk: console [ttyPS1] enabled
[ 2.677115] printk: console [ttyPS1] enabled
[ 2.681418] printk: bootconsole [cdns0] disabled
[ 2.681418] printk: bootconsole [cdns0] disabled
[ 2.690695] of-fpga-region fpga-full: FPGA Region probed
[ 2.700427] gpio gpiochip1: (zynqmp_gpio): not an immutable chip, please consider fixing it!
[ 2.713450] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
[ 2.724605] zynqmp-display fd4a0000.display: vtc bridge property not present
[ 2.731795] OF: graph: no port node found in /axi/display@fd4a0000
[ 2.738291] xlnx-drm xlnx-drm.0: bound fd4a0000.display (ops 0xffff800008f18588)
[ 2.940064] Console: switching to colour frame buffer device 80x30
[ 2.962922] zynqmp-display fd4a0000.display: [drm] fb0: xlnxdrmfb frame buffer device
[ 2.970972] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.display on minor 0
[ 2.978472] zynqmp-display fd4a0000.display: ZynqMP DisplayPort Subsystem driver probed
[ 2.988149] spi-nor spi0.0: mt25qu512a (65536 Kbytes)
[ 2.990416] tpm_tis_spi spi2.0: 2.0 TPM (device-id 0x1B, rev-id 22)
[ 2.993282] 17 fixed-partitions partitions found on MTD device spi0.0
[ 3.002206] tpm tpm0: A TPM error (256) occurred attempting the self test
[ 3.005905] Creating 17 MTD partitions on "spi0.0":
[ 3.012676] tpm tpm0: starting up the TPM manually
[ 3.022339] 0x000000000000-0x000000080000 : "Image Selector"
[ 3.028774] 0x000000080000-0x000000100000 : "Image Selector Golden"
[ 3.035724] 0x000000100000-0x000000120000 : "Persistent Register"
[ 3.042481] 0x000000120000-0x000000140000 : "Persistent Register Backup"
[ 3.049860] 0x000000140000-0x000000200000 : "Open_1"
[ 3.055500] 0x000000200000-0x000000f00000 : "Image A (FSBL, PMU, ATF, U-Boot)"
[ 3.063381] 0x000000f00000-0x000000f80000 : "ImgSel Image A Catch"
[ 3.070224] 0x000000f80000-0x000001c80000 : "Image B (FSBL, PMU, ATF, U-Boot)"
[ 3.078115] 0x000001c80000-0x000001d00000 : "ImgSel Image B Catch"
[ 3.084963] 0x000001d00000-0x000001e00000 : "Open_2"
[ 3.090584] 0x000001e00000-0x000002000000 : "Recovery Image"
[ 3.096903] 0x000002000000-0x000002200000 : "Recovery Image Backup"
[ 3.103826] 0x000002200000-0x000002220000 : "U-Boot storage variables"
[ 3.111028] 0x000002220000-0x000002240000 : "U-Boot storage variables backup"
[ 3.118815] 0x000002240000-0x000002280000 : "SHA256"
[ 3.124444] 0x000002280000-0x0000022a0000 : "Secure OS Storage"
[ 3.131025] 0x0000022a0000-0x000004050000 : "User"
[ 3.135816] mtd: partition "User" extends beyond the end of device "spi0.0" -- size truncated to 0x1d60000
[ 3.149161] macb ff0e0000.ethernet: Not enabling partial store and forward
[ 3.159701] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 46 (00:0a:35:0c:27:ba)
[ 3.169989] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
[ 3.176552] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM
[ 3.183047] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM
[ 3.189529] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM
[ 3.221594] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.227100] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
[ 3.234872] xhci-hcd xhci-hcd.1.auto: hcc params 0x0238f625 hci version 0x100 quirks 0x0000000002010810
[ 3.244293] xhci-hcd xhci-hcd.1.auto: irq 48, io mem 0xfe200000
[ 3.250319] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 3.255802] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
[ 3.263457] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 3.270109] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 3.278378] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.285596] usb usb1: Product: xHCI Host Controller
[ 3.290472] usb usb1: Manufacturer: Linux 6.1.5-xilinx-v2023.1 xhci-hcd
[ 3.297082] usb usb1: SerialNumber: xhci-hcd.1.auto
[ 3.302387] hub 1-0:1.0: USB hub found
[ 3.306161] hub 1-0:1.0: 1 port detected
[ 3.310382] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 3.318644] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.325863] usb usb2: Product: xHCI Host Controller
[ 3.330739] usb usb2: Manufacturer: Linux 6.1.5-xilinx-v2023.1 xhci-hcd
[ 3.337349] usb usb2: SerialNumber: xhci-hcd.1.auto
[ 3.342468] hub 2-0:1.0: USB hub found
[ 3.346237] hub 2-0:1.0: 1 port detected
[ 3.351632] i2c i2c-1: using pinctrl states for GPIO recovery
[ 3.357751] gpio-24 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
[ 3.366622] i2c i2c-1: using generic GPIOs for recovery
[ 3.372958] at24 1-0050: supply vcc not found, using dummy regulator
[ 3.379626] at24 1-0050: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
[ 3.386462] at24 1-0051: supply vcc not found, using dummy regulator
[ 3.393115] at24 1-0051: 8192 byte 24c64 EEPROM, writable, 1 bytes/write
[ 3.400029] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 49
[ 3.407444] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s
[ 3.414901] cdns-wdt ff150000.watchdog: Xilinx Watchdog Timer with timeout 10s
[ 3.425936] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 3.426606] clk: couldn't set sdio1_ref clk rate to 187498123 (-16), current rate: 199999998
[ 3.432990] of_cfs_init
[ 3.441497] clk: couldn't set sdio1_ref clk rate to 187498123 (-16), current rate: 199999998
[ 3.443544] of_cfs_init: OK
[ 3.454787] clk: Not disabling unused clocks
[ 3.459376] ALSA device list:
[ 3.462335] No soundcards found.
[ 3.483071] mmc1: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
[ 3.587447] Freeing unused kernel memory: 2240K
[ 3.591058] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 3.592094] Run /init as init process
[ 3.743684] usb 1-1: New USB device found, idVendor=0424, idProduct=2744, bcdDevice= 2.21
[ 3.751873] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.759011] usb 1-1: Product: USB2744
[ 3.762673] usb 1-1: Manufacturer: Microchip Tech
[ 3.814134] hub 1-1:1.0: USB hub found
[ 3.817911] hub 1-1:1.0: 5 ports detected
[ 3.878009] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 3.903475] usb 2-1: New USB device found, idVendor=0424, idProduct=5744, bcdDevice= 2.21
[ 3.911652] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=0
[ 3.918784] usb 2-1: Product: USB5744
[ 3.922438] usb 2-1: Manufacturer: Microchip Tech
ipmi_fru_next: multirecord area checksum invalid
[ 3.934710] macb ff0e0000.ethernet eth0: PHY [ff0e0000.ethernet-ffffffff:01] driver [TI DP83867] (irq=POLL)
[ 3.944479] macb ff0e0000.ethernet eth0: configuring for phy/rgmii-id link mode
[ 3.952449] pps pps0: new PPS source ptp0
[ 3.956543] macb ff0e0000.ethernet: gem-ptp-timer ptp clock registered.
MAC address for eth0 is updated to 00:0a:35:0c:27:ba
Waiting for /dev/mmcblk1p2 to pop up (attempt 1)
[ 3.990186] hub 2-1:1.0: USB hub found
[ 3.994149] hub 2-1:1.0: 4 ports detected
Waiting for /dev/mmcblk1p2 to pop up (attempt 2)
[ 4.171059] usb 1-1.5: new high-speed USB device number 3 using xhci-hcd
Waiting for /dev/mmcblk1p2 to pop up (attempt 3)
[ 4.275739] usb 1-1.5: New USB device found, idVendor=0424, idProduct=2740, bcdDevice= 2.00
[ 4.284091] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.291396] usb 1-1.5: Product: Hub Controller
Waiting for /dev/mmcblk1p2 to pop up (attempt 4)[ 4.295840] usb 1-1.5: Manufacturer: Microchip Tech
Waiting for /dev/mmcblk1p2 to pop up (attempt 5)
Waiting for /dev/mmcblk1p2 to pop up (attempt 6)
Waiting for /dev/mmcblk1p2 to pop up (attempt 7)
Waiting for /dev/mmcblk1p2 to pop up (attempt 8)
[ 4.745219] mmc1: new high speed SDXC card at address 59b4
[ 4.751187] mmcblk1: mmc1:59b4 LX64G 58.9 GiB
[ 4.757172] mmcblk1: p1 p2
fsck: fsck.ext4: No such file or directory
[ 5.239695] EXT4-fs (mmcblk1p2): recovery complete
[ 5.246249] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Quota mode: none.
[ 5.863561] systemd[1]: systemd 251.8+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -TPM2 -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 5.895297] systemd[1]: Detected architecture arm64.
Welcome to PetaLinux 2023.1+release-S05010539 (langdale)!
[ 5.976098] systemd[1]: Hostname set to <xilinx-kv260-starterkit-20231>.
[ 5.984934] macb ff0e0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control tx
[ 5.992704] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.110207] systemd-sysv-generator[352]: SysV service '/etc/init.d/watchdog-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 6.147702] systemd-sysv-generator[352]: SysV service '/etc/init.d/inetd.busybox' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 6.172695] systemd-sysv-generator[352]: SysV service '/etc/init.d/fuse' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 6.196366] systemd-sysv-generator[352]: SysV service '/etc/init.d/sshd' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 6.558290] systemd[1]: Queued start job for default target Multi-User System.
[ 6.612688] systemd[1]: Created slice Slice /system/getty.
[ OK ] Created slice Slice /system/getty.
[ 6.636476] systemd[1]: Created slice Slice /system/modprobe.
[ OK ] Created slice Slice /system/modprobe.
[ 6.660410] systemd[1]: Created slice Slice /system/serial-getty.
[ OK ] Created slice Slice /system/serial-getty.
[ 6.684028] systemd[1]: Created slice User and Session Slice.
[ OK ] Created slice User and Session Slice.
[ 6.707287] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ OK ] Started Dispatch Password ts to Console Directory Watch.
[ 6.731246] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ OK ] Started Forward Password Ruests to Wall Directory Watch.
[ 6.755368] systemd[1]: Reached target Path Units.
[ OK ] Reached target Path Units.
[ 6.771144] systemd[1]: Reached target Remote File Systems.
[ OK ] Reached target Remote File Systems.
[ 6.791144] systemd[1]: Reached target Slice Units.
[ OK ] Reached target Slice Units.
[ 6.807159] systemd[1]: Reached target Swaps.
[ OK ] Reached target Swaps.
[ 6.823600] systemd[1]: Listening on RPCbind Server Activation Socket.
[ OK ] Listening on RPCbind Server Activation Socket.
[ 6.847160] systemd[1]: Reached target RPC Port Mapper.
[ OK ] Reached target RPC Port Mapper.
[ 6.863410] systemd[1]: Listening on Syslog Socket.
[ OK ] Listening on Syslog Socket.
[ 6.879285] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ OK ] Listening on initctl Compatibility Named Pipe.
[ 6.903572] systemd[1]: Listening on Journal Audit Socket.
[ OK ] Listening on Journal Audit Socket.
[ 6.923354] systemd[1]: Listening on Journal Socket (/dev/log).
[ OK ] Listening on Journal Socket (/dev/log).
[ 6.947451] systemd[1]: Listening on Journal Socket.
[ OK ] Listening on Journal Socket.
[ 6.963583] systemd[1]: Listening on Network Service Netlink Socket.
[ OK ] Listening on Network Service Netlink Socket.
[ 6.988470] systemd[1]: Listening on udev Control Socket.
[ OK ] Listening on udev Control Socket.
[ 7.011372] systemd[1]: Listening on udev Kernel Socket.
[ OK ] Listening on udev Kernel Socket.
[ 7.031396] systemd[1]: Listening on User Database Manager Socket.
[ OK ] Listening on User Database Manager Socket.
[ 7.071348] systemd[1]: Mounting Huge Pages File System...
Mounting Huge Pages File System...
[ 7.089871] systemd[1]: Mounting POSIX Message Queue File System...
Mounting POSIX Message Queue File System...
[ 7.113959] systemd[1]: Mounting Kernel Debug File System...
Mounting Kernel Debug File System...
[ 7.131460] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[ 7.167323] systemd[1]: Mounting Temporary Directory /tmp...
Mounting Temporary Directory /tmp...
[ 7.184925] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.1.5-xilinx-v2023.1/modules.devname).
[ 7.204362] systemd[1]: Starting Load Kernel Module configfs...
Starting Load Kernel Module configfs...
[ 7.222307] systemd[1]: Starting Load Kernel Module drm...
Starting Load Kernel Module drm...
[ 7.242282] systemd[1]: Starting Load Kernel Module fuse...
Starting Load Kernel Module fuse...
[ 7.268412] systemd[1]: Starting RPC Bind...
Starting RPC Bind...
[ 7.283263] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 7.296220] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
[ 7.309128] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
[ 7.335506] systemd[1]: Starting Journal Service...
Starting Journal Service...
[ 7.356483] systemd[1]: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 7.377310] dmaproxy: loading out-of-tree module taints kernel.
[ 7.399574] systemd[1]: Starting Generate network units from Kernel command line...
Starting Generate network ts from Kernel command line...
[ 7.426312] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 7.443605] EXT4-fs (mmcblk1p2): re-mounted. Quota mode: none.
[ 7.454346] systemd[1]: Starting Coldplug All udev Devices...
Starting Coldplug All udev Devices...
[ 7.476460] systemd[1]: Started RPC Bind.
[ OK ] Started RPC Bind.
[ 7.491562] systemd[1]: Started Journal Service.
[ OK ] Started Journal Service.
[ OK ] Mounted Huge Pages File System.
[ OK ] Mounted POSIX Message Queue File System.
[ OK ] Mounted Kernel Debug File System.
[ OK ] Mounted Temporary Directory /tmp.
[ OK ] Finished Load Kernel Module configfs.
[ OK ] Finished Load Kernel Module drm.
[ OK ] Finished Load Kernel Module fuse.
[ OK ] Finished Load Kernel Modules.
[ OK ] Finished Generate network units from Kernel command line.
[ OK ] Finished Remount Root and Kernel File Systems.
Mounting NFSD configuration filesystem...
Mounting Kernel Configuration File System...
Starting Flush Journal to Persistent Storage...
[ 7.739882] systemd-journald[362]: Received client request to flush runtime journal.
Starting Apply Kernel Variables...
Starting Create Static Device Nodes in /dev...
[ OK ] Mounted NFSD configuration filesystem.
[ OK ] Mounted Kernel Configuration File System.
[ OK ] Finished Flush Journal to Persistent Storage.
[ OK ] Finished Apply Kernel Variables.
[ OK ] Finished Create Static Device Nodes in /dev.
[ OK ] Reached target Preparation for Local File Systems.
Mounting /var/volatile...
Starting Rule-based Managefor Device Events and Files...
[ OK ] Mounted /var/volatile.
Starting Load/Save Random Seed...
[ OK ] Started Rule-based Manager for Device Events and Files.
[ OK ] Finished Coldplug All udev Devices.
[ OK ] Finished Load/Save Random Seed.
[ OK ] Found device /dev/mmcblk1p1.
[ OK ] Listening on Load/Save RF itch Status /dev/rfkill Watch.
Mounting /boot...
[ OK ] Mounted /boot.
[ OK ] Reached target Local File Systems.
Starting Create Volatile Files and Directories...
[ OK ] Finished Create Volatile Files and Directories.
Starting Network Name Resolution...
Starting Network Time Synchronization...
Starting Record System Boot/Shutdown in UTMP...
[ OK ] Finished Record System Boot/Shutdown in UTMP.
[ OK ] Started Network Name Resolution.
[ OK ] Started Network Time Synchronization.
[ OK ] Reached target Host and Network Name Lookups.
[ OK ] Reached target System Initialization.
[ OK ] Started Daily Cleanup of Temporary Directories.
[ OK ] Reached target System Time Set.
[ OK ] Started Daily rotation of log files.
[ OK ] Reached target Timer Units.
[ OK ] Listening on D-Bus System Message Bus Socket.
Starting sshd.socket...
[ OK ] Listening on sshd.socket.
[ OK ] Reached target Socket Units.
[ OK ] Reached target Basic System.
[ OK ] Started archconfig.
[ OK ] Started Job spooling tools.
[ OK ] Started Periodic Command Scheduler.
Starting D-Bus System Message Bus...
Starting dfx-mgrd Dynamic Function eXchange...
Starting inetd.busybox.service...
Starting IPv6 Packet Filtering Framework...
Starting IPv4 Packet Filtering Framework...
[ OK ] Started System Logging Service.
Starting User Login Management...
Starting OpenSSH Key Generation...
[ OK ] Started dfx-mgrd Dynamic Function eXchange.
Aug 1 23:36:54 xilinx-kv260-starterkit-20231 kernel: GIC: Adjusting CPU interface base to 0x00000000f902f000
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: alg: shash: zynqmp-sha3-384 digest() failed on test vector 0; expected_error=0, actual_error=-22, cfg="digest aligned buffer"
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: alg: self-tests for sha3-384 using zynqmp-sha3-384 failed (rc=-22)
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: ------------[ cut here ]------------
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: alg: self-tests for sha3-384 using zynqmp-sha3-384 failed (rc=-22)
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: WARNING: CPU: 2 PID: 69 at crypto/testmgr.c:5835 alg_test+0x4a8/0x540
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: Modules linked in:
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: CPU: 2 PID: 69 Comm: cryptomgr_test Not tainted 6.1.5-xilinx-v2023.1 #1
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: Hardware name: ZynqMP KV260 revB (DT)
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: pc : alg_test+0x4a8/0x540
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: lr : alg_test+0x4a8/0x540
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: sp : ffff800009ee3d50
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x29: ffff800009ee3d50 x28: 00000000000000d9 x27: ffff8000095ccce0
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x26: 0000000000000000 x25: ffff800008e87cf8 x24: 00000000000000d9
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x23: ffff000801f73680 x22: ffff000801f73600 x21: 000000000001110e
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x20: 00000000000000be x19: 00000000000000d8 x18: 00000000fffffffe
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x17: 322d3d6372282064 x16: 656c696166203438 x15: ffff800009ee3980
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x14: 0000000000000000 x13: ffff8000094b6010 x12: 00000000000002df
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x11: 00000000000000f5 x10: ffff8000094e3708 x9 : ffff8000094b6010
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x8 : 00000000fffff7ff x7 : ffff8000094e2010 x6 : 00000000000000f5
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x5 : 0000000000005ff4 x4 : 40000000fffff8f5 x3 : 0000000000000000
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000803864400
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: Call trace:
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: alg_test+0x4a8/0x540
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: cryptomgr_test+0x2c/0x50
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: kthread+0xd8/0xdc
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: ret_from_fork+0x10/0x20
Aug 1 23:36:55 xilinx-kv260-starterkit-20231 kernel: ---[ end trace 0000000000000000 ]---
Aug 1 23:36:56 xilinx-kv260-starterkit-20231 kernel: zynqmp-aes zynqmp-aes.0: ERROR: Unknown error
Aug 1 23:36:56 xilinx-kv260-starterkit-20231 kernel: alg: aead: zynqmp-aes-gcm encryption failed on test vector 8; expected_error=0, actual_error=-64, cfg="in-place (one sglist)"
Aug 1 23:36:56 xilinx-kv260-starterkit-20231 kernel: alg: self-tests for gcm(aes) using zynqmp-aes-gcm failed (rc=-64)
Aug 1 23:36:56 xilinx-kv260-starterkit-20231 kernel: ------------[ cut here ]------------
Aug 1 23:36:56 xilinx-kv260-starterkit-20231 kernel: alg: self-tests for gcm(aes) using zynqmp-aes-gcm failed (rc=-64)
Aug 1 23:36:56 xilinx-kv260-starterkit-20231 kernel: WARNING: CPU: 1 PID: 71 at crypto/testmgr.c:5835 alg_test+0x4a8/0x540
Aug 1 23:36:56 xilinx-kv260-starterkit-20231 kernel: Modules linked in:
Aug 1 23:36:56 xilinx-kv260-starterkit-20231 kernel: CPU: 1 PID: 71 Comm: cryptomgr_test Tainted: G W 6.1.5-xilinx-v2023.1 #1
Aug 1 23:36:56 xilinx-kv260-starterkit-20231 kernel: Hardware name: ZynqMP KV260 revB (DT)
AuAuAuAuAAuAuAuAug Aug 1 23:36:57 Aug 1 23:36:57 xAug AuAug 1 23:37:04 xilinx-kv260-starterkit-20[ OK ] Finished OpenSSH Key Generation.
[ OK ] Finished IPv6 Packet Filtering Framework.
[ OK ] Finished IPv4 Packet Filtering Framework.
[ OK ] Reached target Preparation for Network.
Starting Network Configuration...
[ OK ] Started inetd.busybox.service.
Aug 1 23:37:07 xilinx-kv260-starterkit-20231 kernel: OF: overlay: WARNING: memory leak will occur if overlay removed, property: /fpga-full/firmware-name
Aug 1 23:37:07 xilinx-kv260-starterkit-20231 kernel: OF: overlay: WARNING: memory leak will occur if overlay removed, property: /fpga-full/resets
[ OK ] Started D-Bus System Message Bus.
[ OK ] Started User Login Management.
Aug 1 23:37:07 xilinx-kv260-starterkit-20231 kernel: platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ OK ] Started Network Configuration.
[ OK ] Reached target Network.
Starting DNS forwarder and DHCP server...
[ OK ] Started NFS status monitor for NFSv2/3 locking..
[ OK ] Started Respond to IPv6 Node Information Queries.
Starting Network Time Service...
[ OK ] Started Network Router Discovery Daemon.
Starting Wait for Network to be Configured...
Starting Permit User Sessions...
Starting Target Communication Framework agent...
[ OK ] Finished Permit User Sessions.
[ OK ] Started Getty on tty1.
[ OK ] Started Serial Getty on ttyPS1.
[ OK ] Reached target Login Prompts.
[ OK ] Started DNS forwarder and DHCP server.
[ OK ] Started Target Communication Framework agent.
[ OK ] Started Network Time Service.
[ OK ] Finished Wait for Network to be Configured.
[ OK ] Reached target Network is Online.
[ OK ] Started kria-dashboard-init.
[ OK ] Reached target Multi-User System.
Starting Record Runlevel Change in UTMP...
[ OK ] Finished Record Runlevel Change in UT[ 13.400918] kria-dashboard.sh[912]: SOM Dashboard will be running at http://192.168.0.110:5006/kria-dashboard
PetaLinux 2023.1+release-S05010539 xilinx-kv260-starterkit-20231 ttyPS1
xilinx-kv260-starterkit-20231 login: [ 22.086122] kria-dashboard.sh[925]: 2023-08-01 23:37:26,664 Starting Bokeh server version 2.4.2 (running on Tornado 6.2)
[ 22.093177] kria-dashboard.sh[925]: 2023-08-01 23:37:26,672 User authentication hooks NOT provided (default user enabled)
[ 22.117590] kria-dashboard.sh[925]: 2023-08-01 23:37:26,696 Bokeh app running at: http://localhost:5006/kria-dashboard
[ 22.118009] kria-dashboard.sh[925]: 2023-08-01 23:37:26,697 Starting Bokeh server with process id: 925
![LogicTronix [FPGA Design + Machine Learning Company]](https://hackster.imgix.net/uploads/attachments/1123066/_SyVIfEqFUU.blob?auto=compress%2Cformat&w=60&h=60&fit=min&dpr=2)
41 projects • 166 followers
We are Certified FPGA Design + Machine Learning Company with expertise on Machine Learning, Computer Vision, Embedded & Crypto Development.
Comments
Please log in or sign up to comment.