Published June 22, 2021 © GPL3+

Arduino DVD motor

Driving DVD motor using an arduino UNO and motor shield

BeginnerWork in progress2,530

Things used in this project

Hardware components

Arduino UNO

Development Board, Motor Control Shield

Software apps and online services

Arduino IDE

Hand tools and fabrication machines

Multitool, Screwdriver

Story

ABOUT THE PROECT:

In this project I am going to Drive SLED-Motor and SPINDLE-Motor of a DVD player using an Arduino Uno and An Adafruit Motor Shield. So Let's get started.

LIST OF HARDWARES:

Arduino UNO
Adafruit Motor shield
Arduino UNO programming cable
Copper Wires
Screw Driver
DVD LENS mechanism

PICTURES OF HARDWARES:

Arduino UNO

Arduino UNO

Adafruit Motor Shield

Adafruit motor shield

DVD PICK-UP MECHANISM

1 / 2

SCREW DRIVER

Screw Driver

I connected the spindle motor to M2 and SLED Motor to M2 the wiring of hardware is very simple so I have not created an Schematic Diagram for This Project. There is no any technical information regarding this project because this is a quite simple project.

OTHERPICTURES OF MY WORK:

Picture-1

Picture-2

PICTURE-4

Picture-5

Picture-6

1 / 2

AuthorandDesigner-RamjiPatel376

Arduino DVD Motor

/Arduino.cc/
/Ramji Patel376/

#include <AFMotor.h>
#include <Servo.h>

AF_DCMotor motor1(3);
AF_DCMotor motor2(2);

void setup() {
  // put your setup code here, to run once:
motor1.setSpeed(200);
motor1.run(RELEASE);
motor2.setSpeed(200);
motor2.run(RELEASE);
}

void loop() {
  // put your main code here, to run repeatedly:
motor1.run(FORWARD);
motor2.run(FORWARD);
delay(2100);
motor2.run(BACKWARD);
motor1.run(BACKWARD);
delay(2100);
}

Credits

Ramji Patel

26 projects • 18 followers

Myself Ramji Patel. I am an Engineering student and pursuing my B-Tech from Institute of engineering and rural Technology Prayagraj, India.