This is the enclosure designed to hold your cryptocurrency in a hardware wallet. The Enclosure Design has two main covers. We used M2.5 screws for the fitting and you need 8 screws to fix all components. (For more information about the screws please refer PDF file). For the Covers fittings, you must use an uncommon screw drive type to secure the device.
Part List:-
- Raspberry Pi Zero.
- Adafruit 128x64 OLED Bonnet.
- Data Cable.
- For the Screw details, Please see the photo we attached (M2.5)
Electronics and programming Information:- https://www.pitrezor.com/2018/02/
Download Files for the 3d printing:- https://www.thingiverse.com/thing:5679358
Important:-
- We are not responsible electronic design and Programming of this project. So please test the project before starting 3d printing.
- Transfer a small amount of your crypto to the wallet. If this works, transfer the rest.
- If there have any issue with the enclosure. Please contact us. Happy to help you.
Contact us to design your enclosure design
Website:- https://www.sketchwork.xyz/
Email:- info@sketchwork.xyz
Comments