Tim Jackson

8 Projects 9 Followers 0 Following

Control a DC Motor to track the sun. To Track both axis use two boards.

Tim's Solar Motor Driver

111

A small portable plotter Has memory to store small drawings Use Pen or Pencil It also has an Auxiliar output so that a laser can be added

Tim's Mini Plotter 2 with Single PCB

1.2K

Don't have enough JPIO pins on you Microcontroller? This board is controlled via I2C, over 100 on one bus, each controlling 2 motors.

Tim's I2C Dual Motor Driver

60

This is a DC Motor Driver that is controlled via I2C. The I2C Address can be set in the range: 1 to 127. It can read a Quadratic encoder.

Tim's I2C Intelligent DC Motor Driver

244

Adjustable Temperature PTC Hot Plate for soldering SMD

Tim's Hot Plate

4.6K

Want to make a print you have made look more professional? This is how I put Text/Icons on my Printed Plastic Parts.

Placing Decals on Printed Plastic

391

This is a board to control two Nokia screens to give my robot eyes. It will be connected to the microcontroller via I2C (two Wire).

Eyes for My Robot TIM-01 (TIM-01 EYES)

1.4K

On the web are Cloned Keyes CNC Shields for the Arduino NANO. They are cheep and good value. BUT. The Micro Stepping Jumpers are wrong.

Fixing Cloned Keyes CNC Shield for Arduino NANO

9.0K