adachsoft.com

9 Projects16 Followers0 Following
Contact
Joined

March 2017

Projects
How to make LAN/Ethernet relay switch using Arduino UNO and ethernet shield ENC28j60.
How to Make LAN/Ethernet Relay Switch Using Arduino UNO
42K
This adds a PWM to control temperature on a hot wire foam cutter.
Hot Wire Foam Cutter - Arduino PWM
1.6K
Last time I did the hot wire foam cutter, but I missed the temperature control. So that's why I made a simple PWM control.
Hot Wire Foam Cutter - Arduino PWM
5.2K
This is my new head flashlight. I know it looks a bit strange, but it shines as much as the lights in the car.
DIY Mega Head Flashlight With 6x10W LEDs
507
This tutorial will show you how to convert an old power strip into a WiFi remote control to control electrical devices via Internet.
ESP8266 WiFi Remote Relay Switch
22K
In this tutorial I will show you how to convert an old power strip into a WiFi remote control.
ESP8266 WIFI Remote Relay Switch
11K
This is a guide for how to upload new firmware using Arduino IDE. Sonoff is an ESP8266-based WiFi wireless switch.
SONOFF - ESP8266 Update Firmware With Arduino IDE
36K
The DS1307 is a real time clock (RTC) with plus 56 bytes of NV SRAM. Address and data are transferred serially through an I2C bus.
ESP8266 With DS1307 RTC, NV SRAM and Square-Wave Output
9.2K
Products6+ Add products
Arduino UNO
3 projects
ESP8266 ESP-01
2 projects
Arduino IDE
2 projects
Arduino Nano R3
0 projects
Photon
0 projects
Channels1+ Add channels
Make:
Top 1% Contributor