Adrian Smith

6 Projects3 Followers0 Following
Bio

Electronics engineer for around 10 years, repair electronic LED signs and other old electronics from the 1980 / 1990's.

Joined

March 2021

Skills

Electronics

Location

Bradford, United Kingdom

Projects
A large LED display PCB / module to that aims to provide a solution were a larger version of the MAX7219 modules or similar is required.
Large 2.3″ 6 digit 7 segment display with SPI interface
251
A large Arduino based LED clock using 1.8" high digits for the hours and minutes and 0.8" for the seconds. Can be seen from a distance.
Large 6 digit 7 segment LED clock using ATMega328P
888
A 5 digit digital weighing scale controller designed to be used with commonly available HX711 modules and a load cell.
A digital weigh scale controller for HX711 load cell modules
209
A seven segment LED clock that connects to the internet to automatically set the time and sync on the hour every hour.
LED clock with auto time set over Wi-Fi / NTP protocol
1.2K
This is an universal 8 digit internet connected display which displays the time from the NTP service and your YouTube channel statistics.
ESP8266 based NTP clock with YouTube statistics display
716
A YouTube statistics display which shows subscriber and view counts on a 4 digit and 8 digit 7 segment display for that retro look.
YouTube subscriber and view counter using NodeMCU
679
Products10+ Add products
Arduino IDE
5 projects
KiCad
3 projects
Arduino Nano R3
0 projects
Atmel START
1 project
Channels3+ Add channels
Microchip
Member
NodeMCU
Member