James Martel

48 Projects 64 Followers 3 Following

This weeks' project was to utilize a 7" touchscreen, an acrylic baseplate, a Raspberry Pi 4B+ with 2gb using a 1TB Sata OMV NAS boot drive

What Do I Build Next? A Raspberry Pi NAS with 7" Touchscreen

38

What do I Build Next? a robotic project, being built around an AMD Kria KR260 board that I have no knowledge of capabilities.

AMD Pervasive AI Developer Contest Submission- Robotics AI

481

I jumped to by the limited edition Uno Mini with hopes to build a robot, but became disappointed quickly

What Do I Build Next? An Arduino Uno Mini Robot

377

I have purchased each of the Compute Modules but never build or tested them, this time I would get the dual cameras working and then... ?

What Do I Build Next? A Compute 4 Module with IO Board kit

655

Not wanting to take the next "expensive" step in Autonomous robotic vehicles by modernizing obstacle avoidance I investigated LIDAR mapping.

What Do I Build Next? An Advanced LIDAR Tank by Yahboom

677

Finally got this project going. Little documentation, none from vendors. Incomplete schematics, but now I figured it out

What Do I Build Next? ESP8266MOD WiFi car

951

I stumbled upon this Tank vehicle while searching for another project. Very similar to the Devastator Robot with a better IO board

What Do I Build Next? Conqueror FPV Tracked Tank Robot

1.8K

I was resistant to building a spider kit that utilized the inexpensive servos and acrylic parts, this kit uses metal components and servos

What Do I Build Next? A SunFounder PiCrawler- 1st spiderbot

719