Introduction
🎹 Hardware Design and Implementation
🎹 Raspberry Pi interface module(HF1R0x)
🎹 Audio Speaker and Headphone Jack (H07R3x)
🎹 Python Tkinter
🎹 Python pyserial
🎹 Piano GUI Test with Spyder
🎹 Piano GUI Test with FTDI USB-UART 3.3V cable
🎹 Piano GUI Test with HF1R0 module

Published January 27, 2021 © MIT

Hexabitz Piano Controllable from Raspberry Pi and Python GUI

This project uses Hexabitz modules to play the music notes. It’s definitely an effective way to learn about modules, Python GUI & music 🎶

IntermediateFull instructions provided5 hours861

Hexabitz Piano Controllable from Raspberry Pi and Python GUI

Things used in this project

Hardware components

Hexabitz Audio Speaker Module (H07R30)

Hexabitz Raspberry Pi Interface Module (HF1R0x)

Hexabitz 4-Pin USB-Serial Prototype Cable

Hexabitz BitzClamp

Raspberry Pi 4 Model B

DFRobot 7'' HDMI Display with Capacitive Touchscreen

Amazon Web Services Micro HDMI to HDMI Cable Adapter

Story

Introduction:

Make your own piano with Hexabitz modules and Raspberry Pi.
This project uses Hexabitz Modules to play the music notes. It’s definitely an effective way to learn about modules, Python GUI & Music.

🎹 Hardware Design and Implementation

Connect the modules to HF1R0 module.

Make sure to connect your Hexabitz array at the right spot or left spot. In this project, I have Jumper JP1 and JP2 at position 3 & 4 and my Hexabitz array is soldered as shown in the picture below:

Be sure to download the firmware on the module before soldering.

https://hexabitz.com/docs/how-to/update-module-firmware/

Installing Pi operating system -Raspbian Buster with desktop and recommended software-image and Writing an image to the SD card

https://www.raspberrypi.org/documentation/installation/installing-images/README.md

🎹 Raspberry Pi interface module(HF1R0x):

Hexabitz HF1R0x module enables you to seamlessly interface your modules to a Raspberry Pi 3B/3B+/4B single-board computer.

🎹 Audio Speaker and Headphone Jack (H07R3x):

H07R3x is an audio amplifier and speaker module based on ST TS4990 1.2W audio amplifier and STM32F0 MCU.

This module features an on-board 8-ohm rectangular CUI speaker and a headphone output jack.

Use this module to play sounds and tunes stored in the MCU embedded Flash or streamed from an external hardware/another module via array ports.

1 / 3

🎹 Python Tkinter

Tkinter is the standard GUI library for Python. Python when combined with Tkinter provides a fast and easy way to create GUI applications.

Tkinter provides a powerful object-oriented interface to the Tk GUI toolkit.

Creating a GUI application using Tkinter is an easy task.

All you need to do is perform the following steps :

Import the Tkinter module.
Create the GUI application main window.
Add one or more of the above-mentioned widgets to the GUI application.
Enter the main event loop to take action against each event triggered by the user.

You can start Python3 from the command line (with python3) then

import tkinter

If you get an error message then exit out of Python3 and call

sudo apt-get install python3-tk

to install it.

🎹 Python pyserial

This module encapsulates the access for the serial port. It provides backends for Python running on Windows, OSX, Linux, BSD (possibly any POSIX compliant system) and IronPython. The module named “serial” automatically selects the appropriate backend.

Depending on the version of python, there are several commands to install the package pyserial.

sudo apt-get install python-serial python3-serial

🎹 Note1:

There are several ways to determine the USB port to which the device is connected. The fastest is to connect the unit to the USB port then to immediately run the command dmesg -s 1024.

You’ll get directly the tty port on which it is connected.

🎹 Python code to read the serial port:

This section of code primarily instantiates the serial class, setting it up with all the various bits of information that it needs to make the connection with.

port – This defines the serial port that the object should try and do read and writes over.

baudrate – This is the rate at which information is transferred over a communication channel.

parity – Sets whether we should be doing parity checking, this is for ensuring accurate data transmission between nodes during communication.

stopbits – This is the pattern of bits to expect which indicates the end of a character or the data transmission.

bytesize – This is the number of data bits.

timeout – This is the amount of time that serial commands should wait for before timing out.

import serial
ser = serial.Serial(        
               port='/dev/ttyUSB0',
               baudrate = 921600,
               parity=serial.PARITY_NONE,
               stopbits=serial.STOPBITS_ONE,
               bytesize=serial.EIGHTBITS,
               timeout=1
           )

🎹 Piano GUI Test with Spyder

🎹 Piano GUI Test with FTDI USB-UART 3.3V cable:

If you use standard FTDI USB-UART 3.3V cable for power and communication, connect the colored cable wires as follows:

Red (VCC) to 3.3V (top power pad, i.e., corner edge pad).
Black (GND) to GND (bottom power pad, i.e., corner edge pad).
Yellow (RXD) to MCU TXD (top communication pad, i.e., side edge pad).
Orange (TXD) to MCU RXD (bottom communication pad, i.e., side edge pad).

🎹 Piano GUI Test with HF1R0 module:

🎹 Note2:

Why does piano have black and white keys? The white keys represent the musical tones and the black keys represent the half step intervals between those musical tones. The colored keys help pianists decipher between the natural pitches and semitone pitches.

🎹 Note3:

You can complete the code to play all the piano keys with the notes you want or according to the standard tables 🎶🎵

Code

#AulaTest2020
import time
import serial
ser = serial.Serial(        
               port='/dev/ttyUSB0',
               baudrate = 921600,
               parity=serial.PARITY_NONE,
               stopbits=serial.STOPBITS_ONE,
               bytesize=serial.EIGHTBITS,
               timeout=1
           )
print(ser.name)
ser.write ('\r'.encode())
time.sleep(4) 
ser.write ('demo'.encode())
ser.write ('\r'.encode())
x=ser.read(3000)
print (x)
time.sleep(10) 

ser.write ('Play tune C4 C5 D6 G7'.encode())
ser.write ('\r'.encode())
x1=ser.read(4000)
print (x1)

# -*- coding: utf-8 -*-
"""
Created on Sat Jul 25 18:26:13 2020

@author: AulaJ
"""
import time
import serial
import tkinter as tk
ser = serial.Serial(        
               port='/dev/ttyUSB0',
               baudrate = 921600,
               parity=serial.PARITY_NONE,
               stopbits=serial.STOPBITS_ONE,
               bytesize=serial.EIGHTBITS,
               timeout=1
           )

print(ser.name)
ser.write ('\r'.encode())
time.sleep(4) 
ser.write ('ping'.encode())
ser.write ('\r'.encode())
x=ser.read(3000)
print (x)
time.sleep(10)
def clicked(color, num):
    print(color + ': ' + str(num))
    if(num ==0):
        ser.write ('Play tune c7)'.encode())
        ser.write ('\r'.encode())
    elif(num ==1):
        ser.write ('Play tune d6'.encode())
        ser.write ('\r'.encode())
    elif(num ==2):
        ser.write ('Play tune e6'.encode())
        ser.write ('\r'.encode())


    elif(num ==3):
        ser.write ('Play tune f6'.encode())
        ser.write ('\r'.encode())
    elif(num ==4):
        ser.write ('Play tune G6'.encode())
        ser.write ('\r'.encode())
    elif(num ==5):
        ser.write ('Play tune a5'.encode())
        ser.write ('\r'.encode())
    elif(num ==6):
        ser.write ('Play tune b6'.encode())
        ser.write ('\r'.encode())
    elif(num ==7):
        ser.write ('Play tune c5'.encode())
        ser.write ('\r'.encode())
    elif(num ==8):
        ser.write ('Play tune d8'.encode())
        ser.write ('\r'.encode())
    elif(num ==9):
        ser.write ('Play tune e7'.encode())
        ser.write ('\r'.encode())
                    
root = tk.Tk()

scales = 3

root.geometry('{}x200'.format(300 * scales))

white_keys = 7 * scales
black = [1, 1, 0, 1, 1, 1, 0] * scales

for i in range(white_keys):
    tk.Button(root, bg='white', activebackground='gray87', command=lambda i=i: clicked('White', i)).grid(row=0, column=i*3, rowspan=2, columnspan=3, sticky='nsew')

for i in range(white_keys - 1):
    if black[i]:
        tk.Button(root, bg='black', activebackground='gray12', command=lambda i=i: clicked('Black', i)).grid(row=0, column=(i*3)+2, rowspan=1, columnspan=2, sticky='nsew')

for i in range(white_keys * 3):
    root.columnconfigure(i, weight=1)

for i in range(2):
    root.rowconfigure(i, weight=1)

root.mainloop()

# -*- coding: utf-8 -*-
"""
Created on Sat Jul 25 18:26:13 2020

@author: Aula-7-2020
"""
import time
import serial
import tkinter as tk
ser = serial.Serial(        
               port='/dev/ttyS0',
               baudrate = 921600,
               parity=serial.PARITY_NONE,
               stopbits=serial.STOPBITS_ONE,
               bytesize=serial.EIGHTBITS,
               timeout=1
           )

print(ser.name)
ser.write ('\r'.encode())
time.sleep(4) 
ser.write ('ping'.encode())
ser.write ('\r'.encode())
x=ser.read(3000)
print (x)
time.sleep(10)
def clicked(color, num):
    print(color + ': ' + str(num))
    if(num ==0):
        ser.write ('Play tune c7)'.encode())
        ser.write ('\r'.encode())
    elif(num ==1):
        ser.write ('Play tune d6'.encode())
        ser.write ('\r'.encode())
    elif(num ==2):
        ser.write ('Play tune e6'.encode())
        ser.write ('\r'.encode())


    elif(num ==3):
        ser.write ('Play tune f6'.encode())
        ser.write ('\r'.encode())
    elif(num ==4):
        ser.write ('Play tune G6'.encode())
        ser.write ('\r'.encode())
    elif(num ==5):
        ser.write ('Play tune a5'.encode())
        ser.write ('\r'.encode())
    elif(num ==6):
        ser.write ('Play tune b6'.encode())
        ser.write ('\r'.encode())
    elif(num ==7):
        ser.write ('Play tune c5'.encode())
        ser.write ('\r'.encode())
    elif(num ==8):
        ser.write ('Play tune d8'.encode())
        ser.write ('\r'.encode())
    elif(num ==9):
        ser.write ('Play tune e7'.encode())
        ser.write ('\r'.encode())
                    
root = tk.Tk()

scales = 3

root.geometry('{}x200'.format(300 * scales))

white_keys = 7 * scales
black = [1, 1, 0, 1, 1, 1, 0] * scales

for i in range(white_keys):
    tk.Button(root, bg='white', activebackground='gray87', command=lambda i=i: clicked('White', i)).grid(row=0, column=i*3, rowspan=2, columnspan=3, sticky='nsew')

for i in range(white_keys - 1):
    if black[i]:
        tk.Button(root, bg='black', activebackground='gray12', command=lambda i=i: clicked('Black', i)).grid(row=0, column=(i*3)+2, rowspan=1, columnspan=2, sticky='nsew')

for i in range(white_keys * 3):
    root.columnconfigure(i, weight=1)

for i in range(2):
    root.rowconfigure(i, weight=1)

root.mainloop()

Credits

Aula Jazmati

52 projects • 215 followers

💡🕊️

Hexabitz Piano Controllable from Raspberry Pi and Python GUI

Things used in this project

Hardware components

Story

Introduction:

🎹 Hardware Design and Implementation

🎹 Raspberry Pi interface module(HF1R0x):

🎹 Audio Speaker and Headphone Jack (H07R3x):

🎹 Python Tkinter

🎹 Python pyserial

🎹 Piano GUI Test with Spyder

🎹 Piano GUI Test with FTDI USB-UART 3.3V cable:

🎹 Piano GUI Test with HF1R0 module:

Schematics

Hexabitz Piano

Code

Audio Module Test

Piano GUI Test with FTDI USB-UART 3.3V cable

Piano GUI Test with HF1R0 module

Credits

Aula Jazmati

Comments

Embed the widget on your own site

Hexabitz Piano Controllable from Raspberry Pi and Python GUI

Hexabitz Piano Controllable from Raspberry Pi and Python GUI

Things used in this project

Hardware components

Story

Introduction:

🎹 Hardware Design and Implementation

🎹 Raspberry Pi interface module(HF1R0x):

🎹 Audio Speaker and Headphone Jack (H07R3x):

🎹 Python Tkinter

🎹 Python pyserial

🎹 Piano GUI Test with Spyder

🎹 Piano GUI Test with FTDI USB-UART 3.3V cable:

🎹 Piano GUI Test with HF1R0 module:

Schematics

Hexabitz Piano

Code

Audio Module Test

Piano GUI Test with FTDI USB-UART 3.3V cable

Piano GUI Test with HF1R0 module

Credits

Aula Jazmati

Comments

Related channels and tags