Carlotta Berry

14 Projects22 Followers24 Following
Contact
This enhancement of the open-source modular 3d-printed robot add a Micro:Bit and Motor:Bit to do obstacle avoidance
Lily∞Bot with Micro:Bit and Motor:Bit does obstacle avoidanc
37
This project builds on the open-source 3d printed modular educational robot with Adafruit Crickit, Circuit Playground Express obstacle avoid
Lily∞Bot Crickit-Circuit Playground Express: obs avoidance
195
This project will show how to create obstacle avoidance on the Lily∞Bot with Raspberry PI Pico W using MicroPython, 2 motors and a sonar.
Lily∞Bot with Raspberry Pi Pico W: Obstacle Avoidance
361
This project will describe how to use Raspberry PI Pico W and TB6612 to control motors on the robot.
Lily∞Bot with Raspberry Pi Pico W: Motor Control
540
This project describes how to use a sonar to illuminate or modify blink rate or brightness of an LED programmed in MIcroPython
Lily∞Bot with Raspberry Pico W: Use sonar to illuminate LED
69
This project will describe how to play a song/music on the buzzer mounted to the breadboard on the Lily∞Bot programmed in MicroPython.
Lily∞Bot with Raspberry Pi Pico W: Play music on buzzer
214
This project will show how to use a potentiometer to control the blink rate or intensity on an LED written in MicroPython
Lily∞Bot Raspberry PI Pico W: Potentiometer & LED
152
This project demonstrates how to use a photoresistor to control an LED on a Lily∞Bot with a Raspberry PI Pico W programmed in MIcroPython
Lily∞Bot Raspberry PI Pico W: Photoresistor & LED
140