How to program & debug ESP32S3 via USB Serial with Arduino

On chips with an integrated USB Serial/JTAG Controller, it is possible to use the part of this controller that implements a serial port (CDC

BeginnerFull instructions provided1 hour14,501

How to program & debug ESP32S3 via USB Serial with Arduino

Things used in this project

Hardware components

Kit Wifi ESP32-S3 SIM7600CE-M1S

KIT WIFI/BLE ESP32-S3 SIM 2G/3G/4G

Software apps and online services

Arduino IDE

Story

On chips ESP32-S3 with an integrated USB Serial/JTAG Controller, it is possible to use the part of this controller that implements a serial port (CDC) to implement the serial console, instead of using UART with an external USB-UART bridge chip

The ESP32-S2/S3 bootloader does not have USB serial support for Windows 7 or 8. (See https://github.com/espressif/arduino-esp32/issues/5994) please update to version 10 which is supported by espressif! Alternatively you can try this community-crafted Windows 7 driver (https://github.com/kutukvpavel/Esp32-Win7-VCP-drivers)

The ESP32-S2/S3 Arduino board support package is currently part of the 2.0.0 or later release.

Start the Arduino IDE and navigate to the Preferences menu. You can access it from the File menu in Windows or Linux, or the Arduino menu on OS X.

A dialog will pop up just like the one shown below.

We will be adding a URL to the new Additional Boards Manager URLs option. The list of URLs is comma separated, and you will only have to add each URL once.

Copy and paste the link below into the Additional Boards Manager URLs option in the Arduino IDE preferences.

https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_dev_index.json

If you have multiple boards you want to support, say ESP8266 and ESP32, have both URLs in the text box separated by a comma (, )

Once done click OK to save the new preference settings.

The next step is to actually install the Board Support Package (BSP). Go to the Tools → Board → Board Manager submenu. A dialog should come up with various BSPs. Search for esp32.

find ESP32 by Espresif Systems

Click the Install button and wait for it to finish. Once it is finished, you can close the dialog (To ensure stability, I think we should choose version 2.0.3-RC1)

In the Tools → Board submenu you should see ESP32 Arduino and in that dropdown it should contain the ESP32 boards along with all the latest ESP32-S2/S3 boards.

In the Tools > Boards menu you should see the ESP32 Arduino menu. In the expanded menu, look for the menu option for the ESP32S3 DevMode, and click on it to choose it.

And config option "USB CDC On boot: "Enable"" => Enable

OK, we finish setup software.

Connect ESP32-S3 to the USB port as follows:

With Dev KIT ESP32SS3 SIM7600CE made by AhtLab have offer a USB connector for the USB Serial/JTAG Controller — in that case, no extra connections are required.

Kit Wifi ESP32-S3 SIM7600CE-M1S

See more: https://ahtlab.com/san-pham/kit-wifi-esp32-s3-sim7600ce-m1s/

Kit Wifi ESP32-S3 SIM7600CE-M1S

Code

demo code ESP32 - SIM7600

#include <HardwareSerial.h>
#if defined(CONFIG_IDF_TARGET_ESP32) 
    #define mySerial Serial2
#elif defined(CONFIG_IDF_TARGET_ESP32S2)
    #define mySerial Serial1
#elif defined(CONFIG_IDF_TARGET_ESP32S3)
   #define mySerial Serial2
#endif

void setup() 
{
  Serial.begin(115200);
  delay(500);
  #if defined(CONFIG_IDF_TARGET_ESP32) 
    mySerial.begin(115200);
 #elif defined(CONFIG_IDF_TARGET_ESP32S2)
    mySerial.begin(115200);
 #elif defined(CONFIG_IDF_TARGET_ESP32S3)
   mySerial.begin(115200, SERIAL_8N1, 18, 17);
 #endif
  delay(500);
  mySerial.println("ATI");
  delay(100);
  update_serial();
  mySerial.println("AT+CSQ");
  delay(100);
  update_serial();
  mySerial.println("AT+CIMI");
  delay(100);
  update_serial();
  pinMode(2,OUTPUT);digitalWrite(2,HIGH);
  sent_sms();
    
}
void loop() 
{     
  if (Serial.available()){
    char c = Serial.read();
    mySerial.write(c);
  }
 update_serial();
}

void update_serial()
{
    if (mySerial.available()) {
    Serial.write(mySerial.read());
  }
}

void sent_sms()
{
 mySerial.println("AT+CMGF=1");delay(500);
 mySerial.println("AT+CMGS=\"+84941732379\"");delay(500);
 mySerial.print("test sent sms SIM7600");delay(500);
 mySerial.write(26);delay(500);
}

Credits

Nguyen Ha

3 projects • 6 followers

Founder of AHTLAB.COM

How to program & debug ESP32S3 via USB Serial with Arduino