Sometimes it can be useful to install you ESP32 or ESP8266 based project in a cabinet and give it a professional look. This small enclosure kit will help you to bring your ESP based project on a DIN rail.
1 / 3 • with mounted ESP32 module
The kit includes a prototyping PCB with integrated 5V power supply. So you can use for example 24V DC by the cabinet to power the ESP module inside the enclosure. On the pcb you will find 2 different assembly options for a ESP32 and ESP8266 module.
PCB AssemblyPlease follow the attached construction manual for the pcb assembly
If needed, you can add additional circuits or modules (RTC, communication...) on the breadboard area. Beside the breadboard you will find all GPIO and power pins marked on the pcb.
PCB mounting
Place the ESP Module1 / 2 • with assembled ESP8266 module
Depending on the used terminals you have to remove the terminal covers of the top shell.
These covers comes with rated break points. You can remove it with a screw driver and a nose pliers
open the used covers in the enclosure top shell
After mounting the top shell you be ready to mount the Arduibox in a cabinet:
Enclosure mounted in a cabinet
Comments
Please log in or sign up to comment.