MINAS KALARAKIS

11 Projects4 Followers0 Following
CNC machines usually use a floor carpet (which includes press switches) to stop material processing when a person comes near the machine
Auto-stop for CNC machines at person approach
22
How to change the software of a PCB with ESP8285. The PCB has button, relay and a LED
esp8285 PCB
96
This application note is intended to serve as a reference for the MSP430 IrDA module. The module is configured at 57600bps
MSP430 and IrDA communication
194
In this project, I present the construction of a calorimeter based on the MSP 430 , Impeller type heat meter
Electronic standalone calorimeter with MSP430
143
This application note is intended to serve as a reference for communicating with Microchip's 24AA025E48 by software
MSP430 and 24AA025E48 read MAC address
122
A full MSP430 project including functions to work with Newhaven NHD-C0216CiZ-FN-FBW-3V or any other LCD based on the ST7032 i2c controller.
MSP430 + NEWHAVEN LCD ST7032i FULL PROJECT
546
Digital thermostat for the burner and boiler. It has a remote monitor via an ethernet interface. It needs an ethernet module for Arduino.
Thermostat for Burner and Boiler with Ethernet, Arduino
1.2K
Concerns facilities where hot water is produced by burning oil.
Digital Thermostat for Burner and Hot Water Boiler
786